W-Resources M-01 Metroplex Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand to keep the weight off the hips of the W-Resources M-01 Metroplex action figure.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 64
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
This is a stand to keep the weight off the hips of the W-Resources M-01 Metroplex action figure. This is based off of the original design of The Reflector Files who made it out of wood. I have modeled it to be printable. There is a 5mm hole down the center if you wish to accommodate a rod for support. This can support a 3/16 metal, wooden, or fiberglass rod. There are also alignment pegs which you may find is enough to support the figure. I recommend printing this from petg but pla may be good enough. Please use at least 3 walls. Note you will need to spread the hips out a little to fit the stand.