Selach RC racecar MK1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an RC racecar, of which I tried to 3d print as much as possible.
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1079
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Everything should be printed in PETG, the 4.5mm holes should have a heated insert put into them, ie, those holes with a covered ending.
parts needed:
1000kv bldc motor: https://amzn.to/4cSVYUc
33000 mah 11.1v 60C battery: https://amzn.to/4cQEd86
MG 996R servo: https://amzn.to/4iA48SG
2 40 amp ESC's: https://amzn.to/42StW6R
6-channel receiver and controller: https://amzn.to/42PnflZ
Y servo splitter (fem to two mal): https://amzn.to/44d6tQ4
4 1 to 10 rc car tires: https://amzn.to/44GBwDS
m3 screws and bolts: https://amzn.to/3YQyUj0
2 m3 low profile screws: https://amzn.to/3EsojUK
22mm skateboard bearings: https://amzn.to/42Kc1z0
10mm small bearings: https://amzn.to/3EoqecY
m3 heated inserts: https://amzn.to/4iCPREX
and zipties
(They are all affiliate links that, at no extra cost to you, will help me continue making these projects)