Jabra Evolve 80 MS Stereo USB headband
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New headband to replace the broken one
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Jabra Evolve 80 is a very good headphone, but unfortunately its headband is defective from the factory. The material is not elastic enough, so it breaks after 1-2 years of use. I was sorry to throw it away, because otherwise it works perfectly. Since I also like to draw, I drew a new one in Fusion 360. The model contains quite fine details, so I recommend printing with a resin printer and (semi-)elastic resin. I printed it with an FDM printer from PLA (0.4 mm nozzle), and although the end result was not flawless, it was assemblable and perfectly usable. In any case, I recommend setting up the printer accurately and leveling the table.