Jabra Evolve 80 MS Stereo USB headband
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New headband to replace the broken one
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 47
- Makes
- 1
- Views
- 169
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Jabra Evolve 80 is a very good headphone, but unfortunately its headband is defective from the factory. The material is not elastic enough, so it breaks after 1-2 years of use. I was sorry to throw it away, because otherwise it works perfectly. Since I also like to draw, I drew a new one in Fusion 360. The model contains quite fine details, so I recommend printing with a resin printer and (semi-)elastic resin. I printed it with an FDM printer from PLA (0.4 mm nozzle), and although the end result was not flawless, it was assemblable and perfectly usable. In any case, I recommend setting up the printer accurately and leveling the table.