1 / 1
Braun 500 Lumen LED Rechargable Light (59536) Hinge Fix — zdjęcie 1

Braun 500 Lumen LED Rechargable Light (59536) Hinge Fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hinge Fix for LED Work Light

Ocena
0 / 5
Polubienia
2
Pobrania
44
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Hinge Fix for Harbor Freight LED Work Light SKU: 59536

 

I have had a few of these lights and the hinges always break on them. Thankfully, this is a super fast and easy print (mine was 30 minutes for both sides!)!

I printed this from ABS on my Voron V2.4 (I accomodated for ~3% shrinkage in clearances!).

 

Uses all stock hardware upon disassembly.

 

Disassembly Instructions: 

Be super careful upon disassembly, as the springs and ratcheting mechanisms use very small pieces!

 

Unthread the large collar above the power button/charging port. 

Unplug electrical connector from the handle to the light (pull gently, there are no locking tabs!). 

Unscrew 2X Screws from the hinges to the collar (1 per side):

 

Slide/Push hinge assembly outside of the collar (can be tight!):

 

Printing Instructions:

Supports required! (I used tree supports, doesn't matter)

 

RECOMMENDED: 

Infill: 60%

Wall Loops: 5

Top and Bottom Shell Layers: 5

 

I tossed the STEP files in case anyone wants to modify them!

 

Happy printing!

 

Tagi