Factory signal beacon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Signal beacon for determinating signal output of control units and other devices used perhaps in factory.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
FACTORY SIGNAL BEACON
This is simple signal beacon with up to 4 signal segmets. It´s made out of transparent PETG and regular jetblack PETG prusament. I set the wall thickness on 1mm and everything went smooth even with 15% infill.
There is no need for supports.
You may choose which number of segments you like. I have attached the folder according to number of segments.
PLEASE!! Don´t make the same mistake as i did and when wiring up the LEDs, use transparent casing LEDs, otherwise the effect won´t be so shiny. I also smoothed the tops of the LEDs to give the light wider angle.
The mounting is bit complicated, but it´s possible. I reccomned to adjust the stl. if you would not be satisfied.
ENJOY!