Factory signal beacon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Signal beacon for determinating signal output of control units and other devices used perhaps in factory.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 35
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
FACTORY SIGNAL BEACON
This is simple signal beacon with up to 4 signal segmets. It´s made out of transparent PETG and regular jetblack PETG prusament. I set the wall thickness on 1mm and everything went smooth even with 15% infill.
There is no need for supports.
You may choose which number of segments you like. I have attached the folder according to number of segments.
PLEASE!! Don´t make the same mistake as i did and when wiring up the LEDs, use transparent casing LEDs, otherwise the effect won´t be so shiny. I also smoothed the tops of the LEDs to give the light wider angle.
The mounting is bit complicated, but it´s possible. I reccomned to adjust the stl. if you would not be satisfied.
ENJOY!