Makita DC18RD Wall Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for a DC18RD, now with screws that directly attach to the charger casing.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 818
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a few complaints that the chargers could come apart from the wall, shearing on 3D printed pins. The update model is slightly thicker, but most importantly now uses a screw to hold the Battery charger casing to the charger.
You'll need a screw from Mcmaster,
https://www.mcmaster.com/90380A292/
Printing is the same as before, orient the part so the nubs are directly up. I used the usual layer trickery so that if you print at .2mm layer height, you wont need to use supports for the recessed screw holes.