1 / 4
Makita DC18RD Wall Mount V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a wall mount for a DC18RD, now with screws that directly attach to the charger casing.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 84
- Makes
- 1
- Views
- 825
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I had a few complaints that the chargers could come apart from the wall, shearing on 3D printed pins. The update model is slightly thicker, but most importantly now uses a screw to hold the Battery charger casing to the charger.
You'll need a screw from Mcmaster,
https://www.mcmaster.com/90380A292/
Printing is the same as before, orient the part so the nubs are directly up. I used the usual layer trickery so that if you print at .2mm layer height, you wont need to use supports for the recessed screw holes.