Bicycle Clips - in four sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cycle clips to keep your trousers (aka pants) out of the chain
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 107
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple design to keep your trousers out of the chain.
I made four sizes until I got the best fit for me. Sadly, I have sparrow legs so the “80” was the best fit for me. The “75” was a little snug even for me but I have included it anyhow.
The model size (75, 80, 85, 90) represents the long axis of the inscribed ellipse. The short axis is set at 85% of the long axis.
Printed in PETG with 2 or 3-perimeters (0.4mm), both of which was fine (4-perimeters is essentially solid).
I printed my final versions with “paint-on fuzzy skin” on the internal surfaces selected in the Prusa Slicer. This definitely makes them less likely to slip in use.