Modular room for Dollhouses/Displays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rooms that allow things to be attached and moved around on the wall and ceiling. Rooms may be attached together too!
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
This is a modular room that can be used for dollhouses, photography, miniature or small object displays or dioramas. It has a sliding mount system on the walls and ceiling so that objects can be attached and moved easily.
I developed this because I couldn't find anything else that met my needs. I wanted something that needed minimal assembly or materials (no magnets!), and I found that Skadis-like systems didn't work at this scale.
THERE'S MORE
I already have several pieces designed for this system - check out my other releases! I will continue releasing parts for it, too.
SIZE
Inside: 11.8 X 11.8 X 11.8cm
Walls: 0.4 cm
Outside: 12.6 X 12.6 X 12.2cm
If there is interest, I can make other sizes or a customizable project.
WALL AND CEILING MOUNT SYSTEM
The system is a slide system. The inside has larger and smaller squares arranged in a checkered pattern. Objects attached to a slider can be inserted in the larger squares (ports) and moved to overlap with smaller squares (anchors) where they will be held in place.
MODULAR ATTACHMENT MECHANISM
Multiple rooms can be attached together via secure joints in the back. I also include small front clasps that will prevent the little flex that remains, though the back joints are sufficient to hold the rooms together.
PRINTING NOTES
I print this using 2 walls and 3 top layers, but for higher quality, you can add more. There might be a slight layer shift toward the bottom, if so, a 3rd wall should smooth it. 4-5 top layers might improve the finish on the back panel if it appears rough.
This print has a large area in contact with the build plate, so you need good adhesion:
- make sure the build plate is clean
- if your printer has an aux fan and you change the filament settings, turn the fan OFF
- the brim should also help
I find that line infill, rather than grid or gyroid, aligns better with the 4mm thin walls of the panels.
Finally, the back connectors are printed in an orientation that maximizes their strength. They also have a brim to ensure the small first layer doesn't pull from the build plate.