Herman Miller Aeron Classic Armrest Height Adjustment Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When your armrest height won't hold you can't easily fix that on classic Aeron chair. This is a simple shim that you…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 435
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When your armrest height won't hold you can't easily fix that on classic Aeron chair. This is a simple shim that you can insert into the space between the chair and armrest to make sure it will stay put.
There are 3 thickness options choose best suited to how loose your armrest is and what nozzles you have available. 0,5mm and 0,7mm prints fine with 0,4mm nozzle.
I used 0,4mm nozzle with 0,08mm layer height and regular PLA but probably would work with PETG or TPU.
To install it loosen the adjustment lever of the armrest and insert the shim while rocking the armrest to make it easier to insert it as it is thin. If you can't close the lever after inserting it might be too thick version.
Category: Replacement Parts