Liczymy pasujące modele…
Protect your pets, toddlers, cables, and self from accidentally rolling over them with your Aeron chair wheels. (might work for other rolling chairs too) It's a relatively quick and simple print, and the guards work best if you put some…
I 3D scanned my grip so that I could voronoi-ze it and sculpt it to perfectly fit my hand. There are three files available for download: raw_scan_grip : A raw scan of my grip. Does not contain internal geometry for the attachment hardware…
This model locks the arm rests to one position of your choosing by replacing the indexing component inside the arm rest with a fixed piece. There are 11 plate options labeled -5 to +5. The more negative a number, the further outwards the…
To stop the annoying slide of your Aeron armrests throughout the day, I've recreated a fixed height stop that can be inserted in the armrest channel. I've included a few height positions and also the fusion360 file. There is a variable…
Aeron Hip Pivot Bolt is the only real issue I have with Herman Miller Aeron chair. In past 14 years about 8 of them broke on me. Actually the "bolt" itself is ok but the casing for the bolt that is made out of some unknown material (looks…
I modeled the Enkei Aeronautics in a 1:10 scale with a 12mm hex for Tamiya-M chassis cars. I suggest printing them face up with supports turned on everywhere. I printed mine with a 0.25mm nozzle and variable layer height (0.15 for the…
Hood to mount most LEDs strips. The channel angled with a slight lip to prevent direct light shining outwards. Allows you to route between the Alpha on the left to the Bravo to the right. Included the one piece hoods and the 4 piece hoods…
This part failed for me on my original Herman miller Aeron. I was frustrated that this part isn't easily available individually without having to buy a whole arm yoke (which is expensive). I've included the fusion 360 file so the…
Herman Miller Aeron Chair as seen here http://www.hermanmiller.co.uk/products/seating/performance-work-chairs/aeron-chairs.html doesn't have a headrest so i knocked one up - not pretty but does the job and is very comfortable. Uses 1…
This is a replacement part for my chair's cracked lumbar plate. I printed it in a fairly rigid TPU, and it's working nicely so far. The lofted surface has some pretty complicated curves that get chewed up when exported at low resolution,…
When your armrest height won't hold you can't easily fix that on classic Aeron chair. This is a simple shim that you can insert into the space between the chair and armrest to make sure it will stay put. There are 3 thickness options…
Added carpet grips to the bottom to avoid Herman Miller Aeron office chair moving when using pedals in a sim rig (racing or flight) Print with supports. It doesn't use much material, and comes off easily when pried from edges. Directional…
I have an ongoing project of making the open, red rings for my Enkei Aeronautics, I'm currently driving them with the flat centercaps but lost one, so I decided to replicate those as well. There is the flat version to print with the flat…
If you've got an older (pre-2005) Herman Miller Classic Aeron chair with the round “dial” knob arm height adjusters (instead of the new flip lever locks) you can find yourself in a constant battle to keep you chair arms fixed in one…
RPG - Steampunk Aeronaut Game Piece 3D printable model.
No magic arms, No claws, Only 3d printed parts and screws! type A self tapping screw, M6 x 40mm X2 and 20mm M6 1t washer X2, that's all Print it with support
For years, the armrests of my Aeron have bothered me. They were always getting in the way of my legs, my desk, or both. Last week, I finally decided to remove them to solve the problem. Imagine my dismay when I found out they can't be…
6 Digit version of the PropWash Sim radio kit, may work with the Logitech yoke, not been tested. Only works with the 6-digit version of the kit, and only supports 1 display. Buy the required kit here:…
If you change the cylinder for the Aeron chair, trim bushing often gets mangled in the process. Additionally, newer cylinders for the chair (I used part# 1B08VM, from MingYi.office store at Amazon.com) look better with a bushing that is…
EDIT 03/07/2024 - Three additional designs added. Six drink coaster designs for Embry-Riddle Aeronautical University. All six designs are available as MMU prints and four of them are also available as layered color change prints. Layer…
This is a super light spinner for an Aeronaut yoke 38mm. The 3mf file has specific settings merged from 3dlabprint.com that enables super light weight thin shell printing. Weighs less than 0.1oz I didn't have a fine enough scale to find…
The Herman Miller Aeron Chair Hip Pivot Bushing Problem the top of the hip pivot bushing in one side of my chair sheared off, and, a little later, pulled through the hole. I was stuck in a too-low folding chair for an unpleasant while.…
I made some replacement rings for the Enkei Aeronautics EK84/HeroesRacing iSpeed. They're not 100% accurate to the original ones, for example the centercaps should have some writing on them but it's so tiny and thus hard to recreate with…
Made this to mount my Svalboard to my Aeron. Requires minor mod to the armrest but is backwards compatible with different screws. BOM: 2x M6 Threaded Inserts 1x 1/4" Threaded Inserts (Model supports up to 5 positions) 2x M6x30 BHCS 2x M6…
a gently remixed armrest support I need to take apart the armrest lock on my Aeron, and tighten it up, but I keep not doing that. this allows me to continue not to bother. I made a few changes to make it more pleasant to use, and I added…
This is a headrest stopper I designed for the Atlas Headrest add-on for the Herman Miller Aeron Chair. I found that, for my headrest at least, no matter how much I tightened the horizontal headrest slider, it would move when I applied…
Herman Miller Aeron Office Chair Wheel Tire Replacement. Includes a wheel pets protector. Works fine. Print Settings Printer: Hypercube Hevo Rafts: No Supports: No Resolution: 0.15 mm Infill: 100% Filament: Generic TPU any Category:…
Perfect Magnetic Storage Solution for Tokens and Dice – Aeronautica Imperialis Fan-made accessory for better tabletop organization This is a fan project , created by and for enthusiasts of Aeronautica . It offers a compact and stylish…
A model to explain the function and workings of an aeronautic magnetic compass [Update] fixed an inversion of east and west :) did this for a french guy, and beeing german, O for East isn't shocking :D Category: Physics & Astronomy
Ersatzteil für die TT-30 Servoplatte für den aeronaut Tripe Speed oder die Thermic Flügel. Damit die Servos nicht, wie in der Anleitung gefordert, eingeklebt werden müssen, kann die Version mit Servohalterung gedruckt werden. Hier können…
Print settings that should be changed for proper slicing: X-Y contour Compensation -> 0.2 mm Wall Generator -> Arachne Wall Loops -> 4 Support -> Enabled, Tree type, Threshold 45 degrees Brim Type -> Outer Brim Slicing Mode -> Close Holes…
To prevent losing hex wrench
Marcadores de daño Aeronautica Imperialis, para colocar los marcadores de daño en el soporte de la aeronave.
The arm rest adjustment screw doesn't lock firmly, so the rest always drops over time. This wedge is inserted internally into the slot by loosening the back rest screws.
Dial de movimiento Aeronautica imprerialis
Inspired from: https://www.freesimstuff.com/downloads--honeycomb.html Fusion 360 file included
Needed some campls to pull fabric on my chair to protect it a little (and give some psychedelic touch to my desk xD) Maybe not the best design, but it work fine
These blocks are to lock the armrest to the top most position on a size C Herman Miller Aeron Chair. You must remove the back, raise the armrest to the top position, insert these blocks and then reinstall the back. Print orientation -…
This is a spacer that can be used as stock extender for ZKM 456 Aeron rimfire rifle. Category: Sport & Outdoors
This is a 3D printed version of the small hatches on the Aeronaut Triple Thermic RC sailplane. The original is a friction fit, and generally needs to be taped on in order not to fall off. Two variants are included: Exact reproduction This…
My wall was getting damaged by the back of the Atlas headrest on my Herman Miller Aeron chair, so I designed this simple bumper that prevents damaging the wall when the chair bumps into it. TPU95A, 15% infill, gyroid pattern. I enabled…
This is the first model I've created, and it started as a joke between friends: "What if you put a headrest from an old car on your fancy office chair?" For the clamp basis, I used the model…
Introduction A new knob Add-ons collection for the legendary Trustmaster TH8S Shifter ! What's in ? Jet Engine : A beautiful simplified Jet Engine knob with flat blades. Just put an ADAPTATOR and it's on your shifter ! Airbus Side Stick :…
I designed this friction plate to prevent the Atlas headrest (Herman Miller Aeron accessory) from sliding because I kept losing my adjustment no matter how hard I tightened the thumb screw. It's inserted between the two linear bearings…
to replace the falling apart foam pad and never have the flake again, most tpus are grippy enough without needing glue to stay in place. Print Settings Infill: 5% Filament Material: TPU Category: 3D Printing
I designed this friction plate to prevent the Atlas headrest (Herman Miller Aeron accessory) from sliding because I kept losing my adjustment no matter how hard I tightened the thumb screw. It's inserted between the two linear bearings…
Marcadores de daño Aeronautica Imperialis, para colocar los marcadores de daño en el soporte de la aeronave.
![[Aeronotic Collection] Add-ons for the TH8S Shifter](https://media.printables.com/media/prints/6318a6a7-97c1-47e0-8b12-ce63aeba4170/images/14249390_e8121556-6bbb-48f7-8d66-7d61276bdbf5_4d0dd4da-0f8a-40d1-aee1-a43c178bc38c/capture-decran-2026-10-26-161620.png)
