1 / 2
Enkei EK84 Aeronautics 1:10 Tamiya M-Chassis wheels — zdjęcie 1
1 / 2

Enkei EK84 Aeronautics 1:10 Tamiya M-Chassis wheels

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1:10 scale model of the Enkei EK84 Aeronautics wheels.

Ocena
0 / 5
Polubienia
19
Pobrania
126
Wydruki
0
Wyświetlenia
574
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modeled the Enkei Aeronautics in a 1:10 scale with a 12mm hex for Tamiya-M chassis cars.

I suggest printing them face up with supports turned on everywhere.

I printed mine with a 0.25mm nozzle and variable layer height (0.15 for the barrel, 0.05 for the face) and it turned out very nice. The centercap is just pressed into the wheel, sadly I can't test if it holds up to the car driving around since my only battery for that chassis broke.

 

16.01.2024 UPDATE:

I messed up the groove for the tyre to sit in, it was a bit too narrow causing the tyres to bulge invwards. Fixed this by changing the distances a bit, tyres fit perfectly now!

Tagi