Bee Hotel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Bee hotel with two parts: - Inner housing for tubes - Outer body as decoration
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple Bee Hotel made of two parts:
- Inner housing to fit in tubes and other elements
- Outer body for decoration
I made this model to replace my old bee hotels which were old and rough weather broke them apart, so I moved some tubes and added new tubes as well.
It's easy to print, no supports needed.
You can use adaptive cubic infil to save a bit of filament.
I used Overture Brown and Black Petg to print both variants, with 0.20 layer height.
To hold both parts, I added inner hole for a small screw.
Note: on the Bamboo outer body printed results you may see I have a few layers of different colours - I did it intentionally because brown filament was at the limit to finish before the print is over.