1 / 7
Raspberry Pi 5 Case for Pi with PoE HAT (F)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Pi 5 including PoE hat F including active cooling
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a simple case for a Raspberry Pi 5 including the PoE hat (F)
on idle and few load it will heat up to 48°C - not tested on full load
instructions:
apart from the pi and the hat you will need:
- 12x m2.5 hex spacer 8mm spacer length with thread
- 4x m2.5 10mm countersunk screw
assebly should be self explanatory
note:
- instead of 12x the 8mm spacer you can use 4x 16mm and 4x 8mm spacer
- if you use the 2x 8mm spacer, tighten them well
NO mSD CARD ACCESS
this case offers no micro SD card access - also, the case is not optimized for mounting/unmounting regularly.
the cover is extra thick and has some stabilizer beam not to bend when tightening the screws.
feel free to ask for any modification that suits you!