1 / 7
Raspberry Pi 5 Case for Pi with PoE HAT (F)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for Pi 5 including PoE hat F including active cooling
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
a simple case for a Raspberry Pi 5 including the PoE hat (F)
on idle and few load it will heat up to 48°C - not tested on full load
instructions:
apart from the pi and the hat you will need:
- 12x m2.5 hex spacer 8mm spacer length with thread
- 4x m2.5 10mm countersunk screw
assebly should be self explanatory
note:
- instead of 12x the 8mm spacer you can use 4x 16mm and 4x 8mm spacer
- if you use the 2x 8mm spacer, tighten them well
NO mSD CARD ACCESS
this case offers no micro SD card access - also, the case is not optimized for mounting/unmounting regularly.
the cover is extra thick and has some stabilizer beam not to bend when tightening the screws.
feel free to ask for any modification that suits you!