LayersFactory
Zgłoś model
1 / 4
H0 modular Bridge Pillar System pluggable / H0 modulares Brückenpfeiler Stecksystem — zdjęcie 1
1 / 4

H0 modular Bridge Pillar System pluggable / H0 modulares Brückenpfeiler Stecksystem

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

OBA

OBA

@OBA_97489

Modular bridge or ramp pillar system for H0 model railway. Good for temporary "carpet"-railways. Pillar height n * 5.6mm

Ocena
0 / 5
Polubienia
46
Pobrania
363
Wydruki
1
Wyświetlenia
1341
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Mechanical Parts
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (27)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (63)Powiązane

Motivation

When bulding a temporary model railway bridge or ramp, you need pillars with various sizes.
Using Lego for this purpose did not look too realistic.
For this reason I designed a pluggable model railway pillar system, that allows you to create any pillar height you need.

We used the Märklin Rail-C system for use with our design.
 
I designed various bridge parts for these pillars, so you are able to build curved and straight bridge tracks.
Examples:


You can find the bridge elements in this collection:
https://www.printables.com/@OBA_97489/collections/2316751

Update November 2026

Some small height corrections were necessaty for some of the parts.
The dove tail groove has a little more space, as the v00-design had a very firm fit.
Also the stl-filename should now contain the correct height index "_<n>x56_" for each 5.6mm step.

[Correction of some stl-files]

Some model files needed a small height correction of 1.0mm.

old file

change

new file

comment

Pillar_base_v00.st

renamed to

Pillar_base_2x56__v00.stl

height info added

Pillar_top_1rail_2x56_v00.stl 

replaced by 

Pillar_top_1rail_2x56_v01.stl

corrected height

Pillar_top_1rail_3x56_v00_1.stl

renamed to

Pillar_top_1rail_2x56_v00_1.stl

height info fix

Pillar_top_1rail_1x56_solo_v00.stl 

replaced by

Pillar_top_1rail_1x56_solo_v01.stl 

corrected height

Pillar_top_1rail_2x56_solo_v00.stl 

replaced by

Pillar_top_1rail_2x56_solo_v01.stl 

corrected height

Pillar_top_1rail_3x56_solo_v00.stl

replaced by

Pillar_top_1rail_3x56_solo_v01.stl

corrected height


[Updated Project Files]

<planned in a next step soon>

old file

change

new file

comment

Pillar_ramp_A_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_ramp_B_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_ramp_C_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_ramp_D_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_ramp_E_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_ramp_F_v00.3mf

replaced by

<tbd>

updated stl-files

Pillar_top_1rail_supt_v00.3mf

replaced by

<tbd>

updated stl-files


[Updated Print Files]

<planned in a next step soon>

old file

change

new file

comment

Pillar_ramp_A_v00_0.2mm_PLA+grey_
MK3SMMU2S_14h25m.gcode

replaced by

<tbd>

updated stl-files

Pillar_ramp_B_v00_0.2mm_PLA+grey_
MK3SMMU2S_20h19m.gcode

replaced by

<tbd>

updated stl-files

Pillar_ramp_C_v00_0.2mm_PLA+grey_
MK3SMMU2S_19h42m.gcode

replaced by

<tbd>

updated stl-files

Pillar_ramp_D_v00_0.2mm_PLA+grey_
MK3SMMU2S_1d2h24m.gcode

replaced by

<tbd>

updated stl-files

Pillar_ramp_E_v00_0.2mm_PLA+grey_
MK3SMMU2S_1d5h27m.gcode

replaced by

<tbd>

updated stl-files

Pillar_ramp_F_v00_0.2mm_PLA+grey_
MK3SMMU2S_1d0h56m.gcode

replaced by

<tbd>

updated stl-files

Print

Printed with PLA+ (gray)
To build a comlete ramp or bridge with ramps, you need quite a number of pillars.
I set up a number of prints that generate the parts required to assemble complete sets of pillars with various heights.
Use the ones that suit best to your individual demand. 
 

Assembly

[Pillar complete]
The resulting pillar height will be n * 5.6mm.
Simply snap base part, center parts (as required) and top part together.

[Base part]
Standard base part:
   Pillar_base_2x56_v00

[Center parts]
   Pillar_center_1x56_v00
   Pillar_center_2x56_v00
   Pillar_center_3x56_v00
   Pillar_center_4x56_v00
   Pillar_center_5x56_v00

[Top part]
Insert 2x 
    PIllar_rail_support_v01
into the dove tail grooves of the parts
    Pillar_top_1rail_2x56_v01
or
    Pillar_top_1rail_2x56_v00_1

[Solo]
Pillar elements used as single elements for small height at the beginning or end of a ramp.
Insert 2x 
    PIllar_rail_support_v01
into the dove tail grooves of the parts
   Pillar_top_1rail_1x56_solo_v01
   Pillar_top_1rail_2x56_solo_v01
   Pillar_top_1rail_3x56_solo_v01

Tagi

bridgesupportmodularh0systemmodellbaupillarh0scalemaerklincgleisbridgesupportbrueckebrueckenpfeilercrail