Shelf for Baby Wipe Warmer - Diaper Station / Changing Table - Fits Momcozy, Fisher Price, and Others
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf holds baby wipe warmer, attaches to the side of your diaper station or changing table.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you need more space on your changing table now that your baby is getting bigger?
Consider giving this attachable shelf a try. Most baby wipe warmers should fit and the shelf can be mounted on varying widths of changing table trim by tightening the vise-like gripper. For reference, our Momcozy wipe warmer measures approximately 230 x 160 x 110 mm (9 x 6.25 x 4.25 inches) and fits nicely on the shelf. The largest portion of this assembly (the main shelf) measures 266 x 196 x 154 mm, so it will print on a Prusa Core One or XL but would need a little modification to print on a printer with a smaller build volume.
Once you have the shelf mounted, the tightening handle is removable so little hands will be less likely to dislodge the shelf accidentally. I designed this to give us more room on the changing table and also practice modeling with dimensions and constraints in Fusion 360.
All parts are 3D-printable, no metal screws or glue required for assembly:

I suggest printing the shelf's main body standing on its side with some organic supports on the build plate for maximum strength:

Example shelf in photos was printed on a combo of our Prusa XL and two Prusa MINI+'s using Prusament PETG - Pistachio Green, Prusa Orange, Signal White, and Mango Yellow. The handle was printed in purple MakeShaper PETG.
P.S. - Printables needs a baby category!