Liczymy pasujące modele…
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
My 2nd daughter was born a few days ago. I had set up the baby diaper trash can, but I didn't have the holder for the filters. I designed this print as a "print-in-place" model. Use double-sided foam tape or a 3M command strip to secure.…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 DUMMY 13 loves COMIC CON! So I have started to design a whole series of characters and costumes for DUMMY 13. This is…
printed with supports from plate only. Fits anything with a ¾ inch board and 3.5 inches tall. Remix of https://www.thingiverse.com/thing:4752580 but wouldnt let me link to it for some reason
Deutsch: UPDATE 3: Ein (experimenteller) Halter für meinen Flaschen-Halter ( http://www.thingiverse.com/thing:3454127 ) hinzugefügt. Basiert auf die "big"-Version mit 26 x 5 mm Öffnung. UPDATE 2: Eine noch größere Version des Halters…
This is a replacement clip for a Litter Genie hinge. It might also work for a Diaper Genie - I don't have one to test with. Printed in PLA, no supports, 75% infill, whatever layer height you wish.
This simple adapter lets you use regular small trash bags in your Diaper Genie! Simply place a trash bag in, insert the adapter, and rotate the adapter to lock it in place!
Was having a hard time keeping everything in order on our changing table so I quickly tossed together a station to hold all of our supplies. Large top compartment holds about 15-25 diapers (depending on size) Lower tray holds your…
This is just a simple ring that allows you to easily and securely use a 13 gallon kitchen bag instead of using the expensive single use bags or the annoying tear and tie off bags. We get bulk 13 gallon bags very cheap so this was a great…
Using the odder reducing diaper trash can systems offered by Tommee Tippee you are facing a lot of costs for the refills. Or you can get a refill for Angelcare/Closer to nature/ Sangenic nappy bin cassettes (…
This 3D printed clip was designed by Mbolo Association ( https://www.facebook.com/MboloFandema ) during the Hackathon focused on use of impact of 3D printing on waste management organized by Make3D Company Limited and UNDP The Gambia…
This is a bracket to hold the diaper sprayer/bidet. The one that came with it broke Print instructions PLA 0.2 mm Layers Use Supports
This is the handle and washer for the Ubi Diaper Pail: https://ubbiworld.com/products/ubbi-diaper-pail Requires: 2 qty - 2.5M x 18mm Screws Include the Fusion360 File if you want use different hardware.
Do you need more space on your changing table now that your baby is getting bigger? Consider giving this attachable shelf a try. Most baby wipe warmers should fit and the shelf can be mounted on varying widths of changing table trim by…
Support for a Graco Pack'n'Play Diaper Changing station so baby doesn't roll off
Reef Diaper media basket that's perfect for 5.5 oz bags of media (E.g. Chemi Pure or activated carbon) with an overflow in case your media clogs.
A2L's Diaper is a purpose-built poop collection box for Bambu Lab A2L 3D printers. Designed to snap securely onto your machine, it efficiently catches all filament purge waste generated during multi-color or multi-material printing…
I designed filter boxes in different sizes for the “Odour Off” diaper pail from Chico. These can be placed inside the bucket and filled with activated carbon. Dimensions of the box length: 80 mm depth: 37 mm height: S 19 mm, M 34 mm, L 50…
This is a plastic bag adapter ring for cat litter or baby diaper buckets. You have to fix the outer part with 4 small self tapping screws to the bucket. Then you can use simple plastic bags for collecting litter. Have fun!
Choose a printing setting that you prefer and print. Print instructions Category: Household Summary Choose a printing setting that you prefer and print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
The Diaper Wizard was my solution to spending nearly $30CAD for Diaper Genie refills that never seemed to last. One of the perks of using the Diaper Wizard is being able to use scented kitchen bags, not only do they cost less and hold…
Needed to replace the odor absorber for my diaper genie pail. Had left over activated charcoal and decided to make an odor absorber. I used pla at .2. more wall the better for the snap fit. I printed the lid with the inside up and used…
Moeda da Escolha! Atira a moeda e vamos ver quem tem que tratar da fralda ou dar biberon pelas 4 da manhã.
need to rotate up and add supports for the handle
Replacement internal (spring-loaded, seals against a gasket) lid for the Dekor Mini diaper pail . Toddler managed to smash through the first one with a block. Printed in PLA because of very fine features and concerns about supports for…
This is a stand that will support a Litter Genie XL, regular Litter Genie, Diaper Genie, or any other flat bottomed object like a flower pot. It is BIG - it took up basically the entire bed of my Creality K1 - but it is stable and steady.…
Úprava velikosti otvoru kartuší pro Tommee tippee plenkové koše. Smysl je jednoduchý, nové nálpně do košů stojí klidně 500Kč za 3 kusy. Vedle toho ale existuje prodej plastového/fóliového rukávu, který také stojí 500Kč v návinu 200m. Tedy…
We bought a diaper changing mat from IKEA. Unfortunately, IKEA only sells changing tables as a whole, so there is no possibility to buy a chest of drawers of your choice and add attach a separate changing table-top on to the chest of…
This attaches to Greco Lauren diaper changing stations and allows you to secure an Owlet base station inside.
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Only changes from the owlet base station are to extend it up higher to better secure the lamp and to make the USB slot thinner so it didn't twist around too much.
Hi all, the lock of the Rotho diaper bucket got broke, so it's not possible to keep it close... not that good ;-) Tried to glue it, but no chance... good to have a 3D Printer... Print, glue and everything is good again! Have fun!ainers
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
The stainless-steel Diaper Genie design is stupid and forces users to shove their hand into a pail full of soiled diapers in order to activate the spring-loaded mechanism. Why is it not foot operated?! Well, no more pushing with your bare…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Is this the most ridiculous use of a 3D printer? Probably not, but it feels like it. When the molded hinge pin on our newer-model Diaper Genie snapped, the available replacement lids to 3D print did not fit. I saw a dad on r/daddit fix…
Im Bild mit dem Windelbär wurde das Gesicht aus Karton gemacht, leider schaffte ich es zeitlich nicht, das Gesicht noch zu drucken und als 3D-Druck an das Geschenk zu machen.
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet
We had an Ubbi Pail with a broken handle on the sliding door on the top - created this as a replacment. Requires M3 bolt threads (I inserted brass ones with a soldering iron) or equivalent.
This should work with any plastic bag from stores
Small tray to hold Diaper Cream Applicator (Booty Brush). Print with painted on supports on the attachment side.
Protect Baby's Head from the Wooden Partition in the Diaper Changing Station
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet Braille created with…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Vectors and icons by SVG Repo : Man Woman Accessibility Diaper Changing Toilet Braille generated by :…
The Backstory We accidentally threw away the original plastic cover that holds the air freshener (or carbon filter pack) for our Diaper Genie the first time we changed out the air freshener. I called the manufacturer and was told they…
A rectangular diaper holder, use with the tray that fits inside, or without the tray. Will hold 3-4 size 5 diapers comfortably, possibly more with a smaller size diaper.
Keep your nursery clean and your hands free with this handy Hanging Diaper Bin ! Designed specifically for busy parents, this two-part system keeps a compact trash bin right where you need it most - attached to the side of your baby's…
The Ubbi diaper pail is decent (smell issues aside) but has a pretty big issue: a full bag of diapers creates a seal, making it much harder to take the full bag of diapers out of the pail. A solution: a breather tube that allows air to…
After moving the diaper genie from a carpeted room to a smooth floored room, it was obvious it wasn't going to stay in place. Everytime you flick the pedal (and ten more times for good measure) it works it's way farther away from you. So…
Needed to replace the odor absorber for my diaper genie pail. Had left over activated charcoal and decided to make an odor absorber. I used pla at .2. more wall the better for the snap fit. I printed the lid with the inside up and used…
I needed a container to catch the purge “poops” that come out the back of my X1C so my cats don't try to eat them. Most of the models for catching poop I found have an open top, so the cats could still get into them if sufficiently…
A lightweight (~100g) nappy bag holder that hangs from the edge of a baby changing table. Designed to hold a nappy sack with tie handles. The design minimises contact between the printed part and the bag - making it more sanitary and…
The Emergency Nappy Change Kit is a tiny, single-use, snap-open pack designed for those moments when you thought you were prepared… and life proves otherwise. This print locks a full quick-change setup inside the part itself by pausing…
Printed using ESUN PLA+ at 0.2mm layer heights with a colour change at 1.4mm. Also got in contact and printed some free batches for local moms groups (encourage the same). Added the Fusion parametric file (still learning the whole…
Replacement Lid for Purepail Classic Diaper Pail. The closing catch on ours broke and no replacement parts are available, this one works very well as a drop-in replacement. The clips for the charcole filter are more rigid than in the…
Bins haven't worked for me, so I made a diaper. Plastic grocery bags are held onto the poop chute to collect debris. You don't even need to get behind the machine. Reach behind to remove the diaper periodically to empty it. Magnets are…
This is a 3D printed version of the Ready Or Not Tot Key. If you lost a key and have a 3D printer here you go! (forgot to fillet this key! Sorry!)
“Think of it like frosting a cake” - our pediatrician FROSTIR (and FROSTIR XL) is a diaper cream applicator (or butt paste spreader, or whatever you want to call it) that gets your baby's butt nicely frosted with butt paste without…
We didn't have much space on top of our changing table. We had everything we needed on shelves underneath which became inconvenient quickly when changing a baby's diaper. I made a set of bins with hooks that could be interchanged. this…
This is my first model on request of my wife. So it is designed for her basic needs during day with our newborn daughter. It should hold diapers size 1-4 pack of wetwipes baby oil, sudocrem 250g, and small bottle of babyvitamins.
I wanted a holder for our changing table to hold / store dry wipes and diaper bag rolls, but could not find any, so i designed this. This will fit a whole pack of dry wipes wich are commonly available in grocery stores in norway (10x10cm,…
It is a dispenser fitting approx. 10 size 1 diapers. Should fit size 2 aswell, but I haven't tried yet. One of my first models. To hang up, you need to additionally print universal Skadis mounts, like for these bins:…
Just a little something I whipped up. I've also added the Fusion360 file for anyone who wants to edit the text or change
![Diaper Dispenser [Size 1] (IKEA Skadis)](https://media.printables.com/media/prints/890861/images/6820519_ec29dc14-3758-46fc-aa3b-d9c05f5e49e3_cb11062e-3893-4768-b1c8-981598228e2a/20240524_075157.jpg)
