Replacement Lid for Purepail Classic Diaper Pail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Lid for Purepail Classic Diaper Pail.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement Lid for Purepail Classic Diaper Pail. The closing catch on ours broke and no replacement parts are available, this one works very well as a drop-in replacement.
The clips for the charcole filter are more rigid than in the original unit, but the filter holder itself is still flexible enough to mount quite easily. The tolerances are quite generous for the hinge, so it moves freely, opening springs work fine and the lock clip still works too.
Includes both the full sized model for those with large print beds as well as one that has been broken up to fit on a 220x220 print bed. (Just used a soldering iron to join the components and it works well) It's an easy print and worked fine without any supports when printed at 0.3mm layer height on a Sovol SV06. Printed PLA with 20% infil seems to be fine so far in terms of strength and keeping smells in.