Breather tube holder for Ubbi diaper pail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses 1/2" PVC pipe to allow air to the bottom of the pail, easing removal of bag of dirty diapers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
The Ubbi diaper pail is decent (smell issues aside) but has a pretty big issue: a full bag of diapers creates a seal, making it much harder to take the full bag of diapers out of the pail.
A solution: a breather tube that allows air to pass down to the bottom, letting the bag slide right out of the pail. Slide over an appropriate length of 1/2" PVC pipe (sch 40) Install with double-sided tape to the long side of the pail.
Printing this out:
Doesn't require much in the way of infill. I went with 15% adaptive cubic, and even a failed print (as long as enough of it goes around the pipe) will do the job.
The part with the square cut out is meant to sit at the bottom of the pail, and hold the breather pipe in place. I ended up not using it on mine, but I'm including it since I made it anyway.