1 / 1
Breather tube holder for Ubbi diaper pail — image 1

Breather tube holder for Ubbi diaper pail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Uses 1/2" PVC pipe to allow air to the bottom of the pail, easing removal of bag of dirty diapers.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution

The Ubbi diaper pail is decent (smell issues aside) but has a pretty big issue: a full bag of diapers creates a seal, making it much harder to take the full bag of diapers out of the pail.

A solution: a breather tube that allows air to pass down to the bottom, letting the bag slide right out of the pail. Slide over an appropriate length of 1/2" PVC pipe (sch 40) Install with double-sided tape to the long side of the pail.

Printing this out:
Doesn't require much in the way of infill. I went with 15% adaptive cubic, and even a failed print (as long as enough of it goes around the pipe) will do the job.

The part with the square cut out is meant to sit at the bottom of the pail, and hold the breather pipe in place. I ended up not using it on mine, but I'm including it since I made it anyway.

Tags