Diaper Genie Lid (New Style) Hinge Pin Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix a broken hinge on a newer Diaper Genie lid with this pivot pin. Press-fit into 3/16" hole or glue in place to repair
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Is this the most ridiculous use of a 3D printer? Probably not, but it feels like it. When the molded hinge pin on our newer-model Diaper Genie snapped, the available replacement lids to 3D print did not fit. I saw a dad on r/daddit fix his with a golf tee, and challenge accepted.
It might be a small fix, but it works flawlessly and saved a perfectly good pail from a landfill.
Installation Options:
Drill & Press-Fit: If you have enough material left, clean up the break area, drill a 3/16" hole, and press the pin through for a tight friction fit.
Adhesive Bond: If the hinge pin snapped flush or tore out, use Loctite Plastic Bonding System to secure it in place.
Print Settings:
Material: PETG
Infill: 100%