Bentobox platform for inverted wiring cabinet in Voron/Tridents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With a BentoBox sitting on this raised platform you'll have easy access to the inverted wiring cabinet from the top.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With a BentoBox sitting on this raised platform you'll have easy access to the wiring cabinet from the top. You won't need to remove the Bentobox to access the wiring. My Voron is a Siboor 300 Trident and I'm very happy to have this simple add-on to make opening the cabinet a trivial event. I have mounted mine on the left side behind the huge parts cooler/blower. I used 3 rare earth magnets to stop any possible vibration, even when the printer is setup for crazy speed. You can see the magnets in one of the pictures. One magnet is inside the top Bento section above the filter, another magnet outside the housing and the third outside the plexiglass. This works well with my Ascot/Tophat mod @ https://www.printables.com/model/1278871-voron-ascot-aka-top-hat-all-the-umbilical-height-i to draw up the fumes and particulate generated from the hotend if you have a raised chamber height, as well.
I printed this on its back using some tree support for the top front long edge. 3 or 4 wall loops, 100% infill, 3 or 4 top and bottom layers. It's very rigid.
You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 . They work well :-)
Also, if you find value in this, please give it a like. Thanks.