1 / 6
Collet for KSGER C245 handle for WABECO Drill Stand (43mm Euronorm) for heat set inserts — zdjęcie 1
1 / 6

Collet for KSGER C245 handle for WABECO Drill Stand (43mm Euronorm) for heat set inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts.

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts.

Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the pressure as it is clamped tight for a longer duration and the C245 handle will become harder to remove from the collet. Please increase the internal diameter or use another, more stable, material if you would like to avoid this.

I printed this part on the Prusa Core One with 100% infill concentric (including top fill and bottom fill pattern). Horizontal shells are set to 0 for top and bottom, this way the layers all line up and move together (See screenshots and .bgcode file).

Tagi