1 / 6
Collet for KSGER C245 handle for WABECO Drill Stand (43mm Euronorm) for heat set inserts — image 1
1 / 6

Collet for KSGER C245 handle for WABECO Drill Stand (43mm Euronorm) for heat set inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts.

Rating
0 / 5
Likes
5
Downloads
15
Makes
0
Views
167
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts.

Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the pressure as it is clamped tight for a longer duration and the C245 handle will become harder to remove from the collet. Please increase the internal diameter or use another, more stable, material if you would like to avoid this.

I printed this part on the Prusa Core One with 100% infill concentric (including top fill and bottom fill pattern). Horizontal shells are set to 0 for top and bottom, this way the layers all line up and move together (See screenshots and .bgcode file).

Tags