Counting matching models…
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
The bike stand is fitting for all popular gravel bike tires. I made it possible to print all parts on Prusa Mini. I glued the parts together with a Loctite plastic superglue. designed for 28 inches tire, works for smaller tires as well.…
I made this to fit one of the better and higher quality drill-stands available(AEG) which has a full-length 25mm deep 43mm hole, which is why the top incline is there to allow access to the spindle-lock and the flats on the Dremel…
~43mm clamp adapter for rotary tools with a Dremel style thread. A new design based on the Drill Press - Rotary Tool Adapter from @AddictiveManu_272921 . I printed with ABS, 4 perimeters and 15% infill with the flange side down.
This is a very easy print to create a fork seal driver to install new fork seals on my ZX-12R without damaging the seal. I'm planning on creating some for my other bikes as well, so keep an eye out :) If you want other sizes, just give me…
Use this tool to accurately measure (43mm) and squarely cut Teflon PTFE tubing for a Prusa MINI/MINI+ . Requires X-ACTO knife . 5ft of PTFE Teflon tubing (2mm ID x 4mm OD) for 1.75 filament Bowden 3D printers can be purchased for about $7…
It can be printes easily.
This is a remix of http://www.thingiverse.com/thing:2154260 snug fit for the popular 21x43mm boards. Mount the PCB with m3x4 screws. The v2 version has mounting holes that are 58mm apart, which is the same as for the Raspberry Pi. That…
An 8020 Fan mount for a 120MM fan with a depth of 43mm. Print instructions Category: Electronics Summary An 8020 Fan mount for a 120MM fan with a depth of 43mm. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution:…
This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…
I've designed a 43mm filter thread for the rollei. It's the largest thread I could make without interfering with the light sensor which is very close to the lens. It's push fit and twist to lock it in between the ribs of the lens. Take…
Hood mount protector ring for Voigtlander 35mm F1.4 Nokton Leica M mount lens. It should be also compatible with few lenses that also have 43mm filter thread: Voigtlander 28mm F1.5 Nokton Leica M mount (untested) Voigtlander 40mm F1.4…
Fix for Small Spools Not Fitting on the FlashForge AD5X This adapter is designed to solve a common issue with the FlashForge AD5X: many 43mm inner diameter spools don’t fit properly on the factory spool holder. This model allows smaller…
Adapter for Triton TRA001 to a 43mm suction hose. (Miele) (Left handed thread!)
Just a plug! Use to your bathtub, sink etc.. 43mm print with TPU Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 15% **Filament:** efilament 3d TPU Green Category: Bathroom
A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…
The adapter has an inner diameter of 16 mm and is compatible with my cheap chinese JCB soldering iron. It also fits the Proxxon drilling and milling bench BFB 2000 with its outer diameter of 43mm. This means it can fit any drill stand…
This is an adaptor to allow attachment of a standard 43mm male threaded part to the Laowa 25mm 2.5-5x macro lens bayonet mount. It has been tested with the Raynox DCR-250 super macro conversion lens and seems to work well. Printed at…
This lens holder is designed specifically for the Olympus XA rangefinder camera. It accommodates a 43mm filter, which minimally obstructs the lower portion of the viewfinder, ensuring accurate framing while taking photos. The design…
Parkside Feinbohrschleifer Adapter für 43mm Eurohalsaufnahme Innengewinde passend nur zu Parkside. gedruckt in PLA 100% Infill
LM2596 Case + 2x Wago 221 slots I have a seccondary fire alarm in my enclosure, that needs 9V. So i made an enclosure that holds 2 wago wire splices. I reccomend you to get a small 1-2mm drill bit. Printing holes this small is kinda hard.…
Hey Folks, here is a clamp adapter for cinema lenses with a 100mm front diameter. I use this in combination with the wooden camera UMB-1 and was modelled after the adapters that came with that kit.
Remix of the BentoBox hepa filter container and bracket to fit the 43mm wide filters I got through the Amazon link.
Things changed from the original design: Resized the router hole (43mm) Moved the router hole slightly to make sure the dust shoe can be installed in the right orientation with the 43mm aluminum router spindle mount Different router…
Mount for the new version of ACE PRO from the Kobra S1 COMBO set, designed for a temperature and humidity sensor 43mm from Aliexpress.…
This is a gridfinity 1x1x4 block with holes from 12mm to 43mm. Measure what you want to hold and add 2mm to it. Then you will have a custom holder for what ever you want. As long as you have a caliper you have the prefect file for what…
It's a 43mmx43mm Camera Quick Release Plate and Mount I designed it to have embedded screws and rods and use rubber bands for tensioning. I will post a picture once I have it assembled. I might add additional versions as I iterated so far…
Just some simple 43mm Hornby track spacers for laying track This example was printed in PETG as its what I had loaded at the time but should be fine in PLA PLA 0.2 Layer No supports Print as orientated with text on the plate
Multipurpose (bed leveling, etc) knobs with 43mm diameter. For brass inserts melting in: M4 (height 8mm) M5 (height 9.5mm)
Object description: Soldering iron adapter for a ø43mm drill stand. Inner diameter = 20mm to fit best for a cheap soldering iron from SREMTECH. The model is supplied in 4 versions. The versions with text can be simply printed in two…
We placed a cat flap in our door, but now that we're moving out the landlord wants us to close it up. Therefore I made this ventilation grate, which can be used for closing any sort of large hole that you want to remain ventilated.…
This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…
Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th
This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…
A few fork seal drivers, if you need additional, let me know and I can make them pretty quick!
Modular lens cap Intro This project was primarily created for me to practice and learn more about designing in FreeCAD. While you'll find many other lens cap designs on Printables that may offer stronger springs or better functionality,…
This is a lens hood for the following Nikon Rangefinder lenses: W-Nikkor 3.5cm f/2.5 (first and second versions) W-Nikkor 3.5cm f/3.5 (second and third versions) The thread is 43mm x 0.5mm pitch, which matches Nikkor lenses from this era.…
Adapter um Proxxon Micromot Geräte mit 20mm Aufnahme in eine Bohrmaschinen Tischklemme einzuspannen. Eine Version für meine alte Tischklemme mit dem ungewöhnlichen Durchmesser 37mm, die Zweite für den normalen 43mm Euro Spannhals…
Remixed model meant for use with Fenix 8 in smaller size. Probably works with the new Forerunners and larger Fenix 8s
Object Description: This is a handle for an electric drill machine, drill hammer, etc. with a 43mm diameter standard connection. By turning the grip the handle will be clamped to the drill machine and the stopper will be clamped in…
Beveled edges provide for a nice fully exposed surface that is difficult for roving miscreants to remove and deflects water/wind. Internal standoffs support the panel at its optimal height. Side notch allows for easy wiring. Watch the…
Bushing adaptor to hold a soldering iron in a press to use for heat inserts. 43mm outside diameter. The inside diameter is 18.6mm at the bottom and the top is 17mm. I designed from scratch but based on similar designs found on Makerworld…
Everything is printable without supports. You will need 3x M3x30mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction to maybe 1.2mm or just use…
Diseñe e hice este utensilio para prensar el café en la cazoleta de mi cafetera, la cual es de 43mm. Se puede re escalar el diámetro al que mas os convenga. Recomiendo poner 4 perímetros y 30 % de relleno.
Filament spool rod hanger (remix from Robinder's spool rod hanger https://www.thingiverse.com/thing:3676334 ) The hanger is designed for OD=43mm pvc tube to be used with button head screws. Hardware required: m4 x12mm button head screws…
This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside…
End cap to fit over a 43mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
Spindle holder insert for Genmitsu 3020 PRO v2 CNC machine. Designed it to hold laser that was smaller than spindle diameter. This adaptor is compatible for 43mm and smaller. Wall size is 3.5mm.
Remix of delta carriages for 43mm rod lengts for using on my anycubic linear plus delta and a 52mm rod distance to my big delta build. With a nice and easy belt tensin system. Remix of : https://www.thingiverse.com/thing:3054385 I'm sure…
This is a remix of the “Dust shoe Ratrig Killerbee 43mm spindle, 36mm and 50mm hose” by “DutchWoodworker”. I used this the original dustshoe by DutchWoodworker since I got my KillerBee about a year ago and it have been great. There are…
Dose zum schrauben für Fotofilter mit 43 mm Durchmesser. Die Dose hat innen einen Durchmesser von 48 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit…
Suction unit for e.g. Maffel spindle. Required are M4 screws 10mm M4 nut M6 nut Magnets 4x1mm
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
Edited to allow the leg to be printed in two parts to fit onto the build plate, removes the requirement to glue the pieces together.
A holder for devices that fit into the Stepcraft 43mm diameter spindle clamp. Fits 1/4" pegboard holes spaced 1" apart Initially I thought it would be for my HF-500 spindle but its a bit heavy and the cable is quite thick. Up on a…
Originally designed to work with Opt Lasers cutting and engraving laser heads, the following file spawns a Laser Air Nozzle that can enable you to produce higher quality items during a laser cutting or engraving procedure. The nozzle…
Hallo zusammen, ich habe eine Schleppmesserhalterung mit einer 43 mm Aufnahme geschenkt bekommen. An meiner CNC betreibe ich aber eine Makita mit einem Spindeldurchmesser von 65mm. Also habe ich einen Halter hierfür konstruiert. Ihr…
Print the topo maps in the sample picture here .
I had been meaning to make something like this for a while and then Taekyeom Lee posted this and pushed me over the edge. https://www.instagram.com/reel/CZp54BjpP_Y/?utm_source=ig_web_copy_link It aint fancy, but it gets the job done.…
39mm to 43mm step up ring/adapter with finger tabs for leverage Print with .08mm layer height or lower. Recommended supports in this orientation: For support settings I like to use 3 top interface layers, .22mm Z distance, 0mm top…
Prévoir vis M5 ou M6 longueur 20mm avec écrou. You need 1 screw M5 or M6 lenght 20mm with a nut.
43mm Diameter jar lid with open top for ventilation. Scalable for different size jars.
It takes 2 80mm hoses for maximum dust extraction with a high volume dust extraction like a Felder AF160. Its mounted to the spindle holder of Sorotec and fits nicely on the Sorotec Basic Line Z Axis. The dusthood is printed in 4 parts,…
Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed. K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when…
Keine Haftung Benutzung auf eiegene Gefahr ! Disclaimer Use at your own risk! ZUVIEL DRUCK KANN DIE BREMSANLAGE SCHÄDIGEN ! TOO MUCH PRESSURE MAY DAMAGE THE BRAKING SYSTEM! Teilenummer des Original Deckels " 6N1611349B " ( Skoda Fabia 5J…
Spice rack for 12 bottles. (43mm max) With a slider/guide for in the cupboard. You can screw the guide with 2 3mm screws to the cupboard.
Gewürzregal für Gläser bis ca. 43mm Seitenlänge. Gedruckt wird ohne Stützen mit 0,2mm, Düse 0,4mm HAPPY.PRINT
Eurohalsaufnahme / euro neck mount 43mm 90mm x 90mm x 26mm support: no vacuum cleaner connection support: yes optional: 4x M3 inserts 36mm (outside), 30mm (inside) 38mm (outside), 32mm (inside) 40mm (outside), 34mm (inside) 42mm…
Made this for my desktop speakers to sit on to be off my desk. my print didnt need supports. pretty simple long ish shelf.
Antrieb/Winder für Prusa Spool-Clips ( Ø43mm ) - Kompatibel zu: Spool-Clip 1kg und Spool-Clip 2kg - Stirnseitige Bohrung Ø22.2mm => zur Aufnahme von einem Kugellager 22x8x7 Benötigt: 1x M8x40 - Inbus 2x M8 - U-Scheibe - Max AD Ø18mm 1x M8…
NOTE: this will not remove the cassette from the hub! I got carried away and made this only to find it's only good for removing the sprockets. Live and learn. I figure someone can still get some use out of it. This is an 8 spline 43mm…
Fits the mounting brackets for antennas that take a u-clamp like this one. https://www.mouser.com/ProductDetail/Seeed-Studio/318020691?qs=sGAEpiMZZMukHu%252BjC5l7YTkdPQ2v63pB7LKnWGhzBgE%3D Designed it to make a portable Meshtastic site.…
This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts. Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the…
This is a simple adapter to put a cheap vinyl cutter in a 43mm spindle holder. Just print the object twice, put the vinyl cutter between the two halves and insert into the collar. Install the blade and use it. Category: Tool Holders & Boxes
Ein Spannhalter 16mm hoch für die Drehmaschine , zum Einspannen für 43mm Eurohals Werkzeuge .
With clip ons on a f800r 1st gen, you can expect blocking your thumb while turning. This model is here to decrease the turning radius by blocking the fork so you can't turn at the maximum. I suggest TPU or Flexfill 92. You will nead to…
This spanner was originaly designed as a replacement part for a welger hay bailer. The contractet lenght is 33mm and in can be expanded to about 43mm. Further dimensions see attached documents.
A 3D printable version of the PHECDA legs/risers. Same dimensions as the original legs but with hex profile to make screwing in and out easier.
Adapter for Vantrue X4S dashcam main camera to use 43mm screw on filters, such as a polarizer to reduce glare. Use an m3 hex nut (either normal or nylock) and an m3 thumbscrew like this , cut to size as desired. clamps onto the end of the…
Keeps your lens cap on the strap instead of in your pocket, in the bag, or on the floor of a parking lot. Prints in under ten minutes from whatever is left on the spool. Fits — the cap Any 43mm-67mm center-pinch lens cap. Retention is on…
Needed a way to mount wires- the wires are 3mm dia. and needed both -tive and +tive. Attaches to the 43mm frame around the door frame and inside the cabin Included all my different models for my purpose V3 works the best but it has an…
The divider is about 43mm wide and 40mm high with a 1.2mm depth
This also doubles as an emergency reserve fund for poker/gambling addicts. STEP files can be remixed for smaller diameter chips for any size bankroll!
tracing ring hydroponic pool noodles score / cut out to 43mm squeeze in pool noodle to start growing Kratky Method can help with cad work if you like
A simple mountable or freestanding Thermostat holder.
This prints nicely (largest end on plate) in pla and does not need supports. I used 15% infill but feel free to experiment!
Um Osmosewasser zu sparen, sind einige meiner Hydroponik Zwischenstationwannen besonders niedrig. Damit die üblichen 50mm Gittertnetztöpfe nicht komplett dief ins Wasser eintauchen, haben die Löcher der Abdeckung einen Durchmesser von…
End cap to fit over a 43mm pipe, used for preventing dirt ingress while laying pipe over numerous days, while renovating a bathroom. This is not airtight, don't use for active waste pipeing Print in PETG or PLA, 3 walls should give good…
The handle for the balcony door is mounted on the outside of the balcony door. It can also be used on terrace door, door screens and similar applications. The holes spacing is 43 mm and 48 mm. The hole diameter is 4.6 mm. Add a small drop…
The divider is about 43mm wide and 40mm high with a 1.2mm depth
Tool for unscrewing the back cover of a wristwatch case. For replacing the battery. The exact dimensions are shown in th
Fix for Small Spools Not Fitting on the FlashForge AD5X This adapter is designed to solve a common issue with the FlashForge AD5X: many 43mm inner diameter spools don’t fit properly on the factory spool holder. This model allows smaller…
This is an adaptor to allow attachment of a standard 43mm male threaded part to the Laowa 25mm 2.5-5x macro lens bayonet mount. It has been tested with the Raynox DCR-250 super macro conversion lens and seems to work well. Printed at…
Designed for organizing writing utensils in Elloven's longer compartment. Fits any standard hexagonal pencil and any standard pen. Designed at half height for 33mm tall Ellowen drawer so you can print 2 of them and stack them on top.…
Simple holder for spice tin can mount under the shelf or on the door. Fits for all spice tins with a diameter of 43mm (e.g., Ostmann). Alternative version: Rack for spice jar (40mm, e.g., Hartkorn) Onshape model for remixing:…
Model of the .350 Legend cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth…
