Filament spool rod (43mm) hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament rod (43mm) hanger for dry box
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 2
- Views
- 298
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Filament spool rod hanger (remix from Robinder's spool rod hanger https://www.thingiverse.com/thing:3676334)
The hanger is designed for OD=43mm pvc tube to be used with button head screws.
Hardware required:
m4 x12mm button head screws x6
m4 nuts x6
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 v2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28
Infill:
25%
Filament: Smith3D PLA+ / PLA Pro Light Blue
Notes:
0.4mm nozzle.
Printed with CHEP's FF fast 0.28 profile.
You can print with normal speed at 0.2 layer height and more infill if you want
Custom Section
Optional #1: Filament feed tube merger 6mm
I built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix to Robinder's original design merges 3 tubes instead of 4 from the original design.
Printed mine with 6.3mm hole diameter for the feed tube but the tube was loose inside the exit hole. Redesigned with 6.2mm hole so hopefully it fit better.
Can be printed without support.
The file to this thing can be found here: https://www.printables.com/model/222162-filament-feed-tube-merger-6mm