RingClock by Nerdiy.de
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
This is my very simple but nice looking RingClock. It's based on an ESP8266 and ESPhome firmware.
It can display time and different animations. Please take the ESPHome firmware as a baseline for future additions.
The provided .step file contains the main frame and the diffusor. I highly recommend to print the diffusor from white or transparent filament.
Print settings
Filament type: Weather and UV-resistant, e.g. PETG, ABS, etc.
Layer thickness: 0.2mm
Infill: 25%
Wall lines: 5
I highly recommend to print the parts in the already defined orientation. The defined orientation is intended to maximize the structural integrity of the part.
Material list, Assembly instructions & more
You can find additional info at the following GitHub repository.
Additional Pictures
