Bruin Bear Statue - UCLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution
A miniature 3D model of the Bruin Bear statue in UCLA's Wilson Plaza. Print with supports.
Model files:
- Bear models, in order of smooth → less smooth: lap5 > lap2 > nosmooth
- Pictured: lap5 (gold), nosmooth (blue)
- Base models: Some models (X_with_holes) include small guide holes to indicate feet placement.
Other files:
- body_points_raw.txt, base_points_raw.txt: The original point cloud, without downsampling. (Format: “x y z [zeros]”.) Print Settings
How I Designed This
The original point cloud was created by combining LiDAR scans from multiple ground-level viewpoints (captured by a mobile robot). CloudCompare and Python were used for preprocessing and interpolation, respectively. Finally, a sequence of MeshLab utilities (Point Cloud Simplification → Compute normals from point sets → Surface Reconstruction: Screened Poisson → [HC] Laplacian Smooth) was used to generate the final mesh.
(Note: Since the scans did not fully capture the top/bottom of the bear, those areas had to be interpolated.)