1 / 4
Silcock Handle (for 16 point splined stem)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silcock Handle made to fit a 3/8" splined valve stem with 16 points (/teeth).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Had a gate valve handle crumble into pieces and other spare parts didnt fit the splined stem so I tried buying one from local hardware shop for a couple buck but still, that did not fit due to the number of teeth … So i just deceided to create a model and print. I used ASA since its outside and exposed to all sorts of weather. I used 75% infill but if i had to do it again I would just go 100%. Took about an hour to print on ender 3 S1 Pro with .5 nozzle, .25 layers, 3 walls.