Arrma Senton Steering Shield

A shield to protect the Armma Senton steering components from stones and prevent jamming. The problem with the SCT body is it catches every little thing the tires throw up and dumps it into the chassis. The Arrma Senton steering is very prone to jam from stones wedging them selves in the arms and under the servo. I've had the steering jam in as little as five seconds when driving on stones. This is very infuriating when racing with some friends and I have to clear jams constantly. This shield does a excellent job preventing the stones and other things from falling into the steering components. Assemble the pieces before placing on the chassis, everything should snap together tightly however if you see your pieces are loose put a drop of super glue on the fingers. These will slide down and grip onto the stock front shield. I made this to fit the 1/10 scale Senton BLX 3s, I do not have any of the other 1/10 Arrma chassis to test fit. I know their other trucks have the front shield apart of the side bracket but the front of it looks similar but I have no way of test fitting other Arrma trucks other then the Senton 3s. UpDate Both left and right top plates have added support to the main two "hooks" to help prevent breaking when assembling.