Easy Dock for Hollyland Lark C1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smash and go charging dock for your HollyLand Lark C1 charging case. No Soldering Necessary.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Solve first world problems related to charging your Hollyland Lark C1 charging case with this model.
Any usb-c cable that fits, thread it through the hole in the base of the dock.
Plug in to your charging case.
Pull the slack out and park the charging case into the dock, then flip the whole thing over and press the cable into the cable channel on the bottom of the dock.
After you've parked the cable at the right position, the charging case will easily press into the dock and charge.
Any printer, any reasonably hard material should do nicely. PLA, PETG etc.
You may want to print a few mm of the base solid to add some lower-center of gravity / weight.
I printed mine with Printed Solid Jesse PLA transitional spool on the BL X1C and the Prusa XL.
v0.01 Expanded Y / dock thickness for a better fit.
v0.02 Adjusted USB-C portal to allow for usb-c cable with thicker head
v0.03 Adjusted cable channel to allow for a thicker cable insulation