1 / 7
Cube Shell for RD Cube (Shengshou Wind) — zdjęcie 1
1 / 7

Cube Shell for RD Cube (Shengshou Wind)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on the Design from Patrick I tinkered the Shell a bit.

Ocena
0 / 5
Polubienia
3
Pobrania
32
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This Shell should fit perfect for the RD Cube aka Shengshou Wind.

But before you print, you should measure your cube and adjust the size in your slicer.

  • First measure the thickness of the cube (all 3 Layers)  - The RD has 57.8mm
  • add 2.5 mm to this number - 60.3mm in this example, this is now the x and y size
  • Measure the thickness of two layers of the cube - 38.5
  • add 1.25 mm to this number - 39.75 in this example - this is the z for the Bottom shell
  • Measure the thickness of one layer of the cube - 19.3
  • add 1.25 mm to this number - 20.55 in this example - this is the z for the top shell

Print with outer Walls first!

This is to prevent, that the holes for the magnets are visible on the outside.

0.2mm Nozzle or less is required, because of the thin walls.

No supports needed.

0.20mm profile worked for me.