1 / 7
Cube Shell for RD Cube (Shengshou Wind) — image 1
1 / 7

Cube Shell for RD Cube (Shengshou Wind)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Based on the Design from Patrick I tinkered the Shell a bit.

Rating
0 / 5
Likes
3
Downloads
32
Makes
0
Views
133
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This Shell should fit perfect for the RD Cube aka Shengshou Wind.

But before you print, you should measure your cube and adjust the size in your slicer.

  • First measure the thickness of the cube (all 3 Layers)  - The RD has 57.8mm
  • add 2.5 mm to this number - 60.3mm in this example, this is now the x and y size
  • Measure the thickness of two layers of the cube - 38.5
  • add 1.25 mm to this number - 39.75 in this example - this is the z for the Bottom shell
  • Measure the thickness of one layer of the cube - 19.3
  • add 1.25 mm to this number - 20.55 in this example - this is the z for the top shell

Print with outer Walls first!

This is to prevent, that the holes for the magnets are visible on the outside.

0.2mm Nozzle or less is required, because of the thin walls.

No supports needed.

0.20mm profile worked for me.