1 / 2
A form for injecting hot glue to hermetically seal the wire connection — zdjęcie 1
1 / 2

A form for injecting hot glue to hermetically seal the wire connection

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fit cables up to 3 or 6 mm diameter. Solder or crimp with a sleeve beforehand.

Ocena
4,571 / 5
Polubienia
997
Pobrania
1209
Wydruki
9
Wyświetlenia
17 917
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A PLA mold works well, but will need to be replaced more often, I recommend using a material with the highest melting point.

Before pouring the glue, grease the mold halves with Vaseline or silicone grease so that they come off more easily.

!!! Models marked with a T have greater tolerance of the positioning pins. !!!

Tagi