1 / 2
A form for injecting hot glue to hermetically seal the wire connection — image 1
1 / 2

A form for injecting hot glue to hermetically seal the wire connection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fit cables up to 3 or 6 mm diameter. Solder or crimp with a sleeve beforehand.

Rating
4.571 / 5
Likes
997
Downloads
1,209
Makes
9
Views
17,912
Reviews
7

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

A PLA mold works well, but will need to be replaced more often, I recommend using a material with the highest melting point.

Before pouring the glue, grease the mold halves with Vaseline or silicone grease so that they come off more easily.

!!! Models marked with a T have greater tolerance of the positioning pins. !!!

Tags