Counting matching models…
Edit: Apologies to anyone who downloaded this before 11/17/2025. I had accidentally uploaded the orginal file, instead of the enlarged one. It is fixed now! If you use a bit of glue to help with adhesion on your build plate, this will…
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
Fits a 36 x 46 mm Glue Gun and Glue stick storage. Fastened with T-Clip for Skadis: https://www.printables.com/model/256
I bought a set that came with these two in addition to Loctite Precision super glue (see my other Gridfinity bin for that one). The Pritt stick is the one with approx 26mm diameter. Fusion 360 model included for remixing.
I simply modified the holes for the north american wall plug to fit in, and i also made more space inside the gun space.
I gave RNLDNKP 's Ticket To Ride card deck a full back. I have a small print bed (Bambu Lab A1 mini) and needed to cut the model in the slicer to be able to print it. This works, but because the original model has two legs in the back it…
Hallo Zusammen, hab die letzten Wochen damit verbracht dezente Seitenschweller zu Konstruieren (meine Freundin hat fleißig mit konstruiert). Original STP Daten sind dabei. Ihr dürft gerne Variationen machen wie ihr möchtet. Nur nicht zum…
Hello. Today I prepared Benny the space guy form The LEGO movie. Benny is approx. 45cm tall. Scale 10:1. For print you do not need MMU unit and the glue is not needed also. Because it is quite big guy I recommend use 3 perimeters, 15%…
This is designed to work with the Adventurer riser lid enhancements for gluing purposes. It will allow you to align your parts perfectly for gluing them together. I didn't like the fit of the model so I cut off the tabs and reprinted them…
This versatile Caliper Holder is designed to fit the Gridfinity system and perfectly accommodates a Digital Caliper. It also features additional slots for an extra battery, Micro SD card, USB, and Glue Stick, making it a highly functional…
Combined two models so they can be printed as one, printer can bridge the gaps without a problem
This vibrant mosaic-styled lizard is a decor keychain inspired by my visit to Park Guell in Barcelona. I designed this model so that you dont need an AMS or glue to put it together. There are 2 main parts of this model, the frame of the…
A VERY simple spreader … Basically, I was looking for a little piece of plastic that I could use to spread glue. Since it is covered in glue after use, I didn't want to bother with cleaning it and be able to trash it. So it had to be…
********* UPDATE 28th March 2026 ******** New nozzle design that has a cone inside the threaded hole that punctures the glue tube and seals around the glue collar. This means no more glue leaking from the threads ... now makes a perfect…
Fits Glue Spreader Remix with Bevel by Jordan K (printed at 150% of original size). Glue Spreader Remix with Bevel by Jordan K | Download free STL model | Printables.com Printed in PETG .2mm 2 walls, 50% infill in about 40 minutes on an…
I added a magnet to hold a bottle cap in place to catch hot glue drips.
Print Your Own Backyard Classic – No Hardware Needed! This fully 3D printable Ladder Toss frame is the perfect addition to your summer fun lineup. Designed with an easy snap-fit system , it requires no screws, glue, or tools —just print…
It's finally ready! This eye-catching design is a must-have addition to your engine collection. About the original engine: What we have here is a “lost” jet engine design the Propfan, that was intended as a fuel-saving alternative…
🖌 Snap-On Glue Brush – Two Bristle Styles, One Awesome Tool! Print Difficulty: 🟢 Easy Print Time: Blink and it's done Materials: Handle in PLA or PETG, Brush heads in TPU (85A for me) Supports: Nope! 🔧 What Is It? Ever had glue everywhere…
The dish for mixing the two-component adhesive that came with the UHU adhesive were too big for my application and I made a mess with it. Therefore I designed my own with higher walls and less area including a spatula. You can store the…
Bring a bit of nostalgia with you wherever you go with this fun Mario Star Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly – Snaps…
Bring a bit of nostalgia with you wherever you go with this fun Mario Lucky Block Keychain! Designed with simplicity and ease of use in mind, this model is perfect for fans of classic games and makers alike. Features 🧩 Easy Assembly –…
I decided to buy a bond it super glue the thicker type. there are a lot of companies that use similar models. sometimes my model stands upright and sometimes lying down depending on which way my toolbox is. so i bought a rod of ptfe 16mm…
This pot screws to the side of your AD5M and provides somewhere safe and accessible for that glue pot to live. I think I may have made the walls thicker than they needed to be but it works well and I'm using it. I have a side mounted…
If you print the and don't want to use any glue, you can print my socket. It will just click in. Print it with support and a 0,15 mm layer height. I added the FreeCAD file (it's very amateurish but working for me; I apologize to the…
A modular Opera Chair , two-color printing possible, no glue required, simply slot it together. The size is about 1:10 of a real life chair. Printing instructions: 0.4 nozzle 0.2mm Structural Supports Legs: use brim Seat: Organic Support…
thank you to the amazing person who made the original pistol model I just made some red dots clip onto it. it may be a little hard to clip in but once you clip it in it won't be coming out. and go checkout my other models.
Update 29/01/26 - Screw together Shocks & Legs officially added! Model is 100% clip or screw together, no glue needed! Update 28/01/26 - Big update! T-case now screws to body, hubs & axles click together. No glue needed! Update 27/01/26 -…
Nozzle, support the underside of the wrench flats. You might want to do a small test print of the threads to go on the bottle (about 10mm or 3/8") TPU Leash, 100% cooling fan and 10mm/s when it prints the stopper (the little stick). Your…
Hold 10 super glue tubes. Designed for Harbor Freight Tubes but probably fits many others.
originally designed for the Qidi Xplus4 but this model should work with any 3d printer that has handles on top. This model uses a strong C shape to hold a 20mm glue stick and an original design to latch onto the handle of the 3d printer…
Bought some glues stick from local supplier. Needed a smaller inset.
Great gift for your mother, grandmother, or anyone who loves a clean and practical home. This smooth and minimal magnetic hook is designed for everyday use in the bathroom, kitchen, or hallway. Thanks to the strong magnet, no glue and no…
i dont have clear filament so i made this apply some oil before ejecting i use vegetable oil and works fine
Super glue holder for SKADIS pegboard with honeycomb texture. Bottle size: 43x22.5mm Use supports only for the two pegs. I used manual tree. Feel free to ignore slicer if it wants to put support around any of the honeycomb areas.
This uses the locking version of https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system to attach BSI glue and activator to openGrid. The glue holder is a little big (as can be seen in the picture) because it…
a simple holder printed in 30 minutes and uses only 5g of filament. fells sturdy and holds gorilla glue upside down is it can be used straight away.
These arrow fins are designed to simplify fletching by eliminating the need for precise alignment and messy glue. The model consists of a thin cylindrical sleeve that slides over the back of the arrow shaft, with three integrated fins…
This is a plane blader holder to remove glue line or to use a plane blade to a flat surface for free hand planing. V1 needs one 20x2mm magnet and four 9x11.6mm magnet V2 needs six 9x1.6mm magnets. these files can also be modified in…
Hi! Im coming to you with my cool (imo) way to hang our vinyl records ! This hanger wont let your vinyl fall, it has screw and and nut. thanks to this you can take off vinyl record whenever you want! I hope you guys will like my project!…
Prints without supports. While I use with 1" on center metal and wood peg board, There are Sy's peglock for many kinds of walls. Sy＇s Peglock - Locking Pegboard System by StellasFun | Download free STL model | Printables.com Sy＇s Peglock…
This remix replaces the glue together three part body with two pieces that snap together. Step 1. Print and assemble the driving plate, blades and pins from the original model (parts 2, 3 and 5). Step 2. Print the remix body front and…
up side down glue holder for when you run low on glue and need gravity to help
This holds 3 Bob Smith Industries 1/2Oz Superglue bottles and 1 2Oz activator spray bottle in a 1x3 Gridfinity bin About Gridfinity: Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman License: CC BY-NC-SA 4.0…
IKEA SKÅDIS Holder for Oval Super Glue Bottle (Cyanoacrylate) This is a custom holder designed for oval-shaped super glue bottles (cyanoacrylate), made specifically for the IKEA SKÅDIS pegboard system. The holder keeps the glue bottle…
Generic holder for gluegun; keep your workspace empty With this design it is ok if the glue drips a bit ;) Can be used as holder on table too 2h print, I added support enforcers I used ASA, PETG should work (beware of gun nozzle temp)
A holder for storing Tombow Mono Multi liquid glue upside down with an arm for storing the lid when in use. I've printed this in a variety of profiles, most commonly 20mm. Supports required for the through hole in the body, suggested for…
Minor remix to dissect the print into three pieces for printing without supports.
This is a Gridfinity tapeholder I made, specifically for my Ikea Alex drawers. It takes up 3x3 grid space. Theres an optional insert you can print to hold 25.5mm glue sticks. Otherwise the inner area can be used for other storage. Tape…
Epoxy resin mixing tray fast glue filler 4x5cm
Just made the inserts so you dont need to glue them, just push them in the hole.
An Ikea Skadis holder for 38mm glue bottles. Remixed from https://www.printables.com/model/517582-gluegluestick-mount-for-ikea-skandis Requires supports to print.
Ikea Skadis pegboards to insert around a Lack table leg. The pieces can be stacked vertically. The "Double Grid" versions have twice as many holes for greater versatility, while maintaining maximum compatibility with standard Skadis…
A 7‑cm aerated‑concrete adhesive comb designed for evenly distributing thin‑bed mortar when laying cellular concrete blocks. The tool features a straight handle and a notched edge that creates consistent adhesive ridges, ensuring optimal…
Clinically effective, drug-free and non-surgical treatment for glue ear or otitis media with effusion Reduces the symptoms of glue ear by opening the eustachian tubes allowing the fluid associated with the condition to safely drain away…
Simple and effective holder designed to keep Loctite super glue bottles stable and upright on the Honeycomb Wall Storage system. Prevents tipping, reduces spills, and keeps your glue ready to use. 🔧 Features: Anti-tip design for stability…
Stackable Epoxy Resin Mixing TRAY Glue Filler 40x50mm
My printer couldn't get the tolerances for the token's thread. So I designed a version with a pin. Just glue the two parts together.
A tiny mixing tray for glue, epoxy, resin, or whatever sticky stuff you’re working with today. It has a little holding tab so you can hold it in your hand, or pinch / clamp it to the edge of a table to keep it from sliding around. Great…
this 200x200mm block allows you to organize 2 6oz accelarator, 4 4oz CA glue bottle, 4 2oz bottle, additional caps, tips, micro-tips. can be printed with any material.
Hacked up a complemantary hot glue "pen" stand holder for my pegboard in OpenSCAD. Thought people who had knocked up the Ryobi 4v USB lithium pegboard tool mount by TBKHomeworld and had the hot glue "pen" might, like me, want to stash the…
Gripper to use for whatever you want :) Assambly without glue and screws. PRINT PART FEDER FROM TPU/FLEX MATERIAL
No-Drill Pliers Holder | Hot Glue Mount Tool Organizer This is a simple and practical pliers holder designed to keep your tools organized and easily accessible. The holder can be mounted inside a cabinet, on a wall, or in a workshop area…
small model i recommend 8 perimiters for strenth purposes and super glue during assembily only supports needed under the large bridge but only on the tip as long as your printer can bridge a few mm the tubes going from multipule parts of…
A simple hook. Flat back; can be mounted with glue or mounting tape. 50mm tall, 20mm wide, 32mm overall width, about 20mm internal width. Dimensions can be adjusted easily by scaling in the slicer. Made for headphones, but good for…
So if you have watched Scott Yu-Jan, you have probably seen his glue gun where he is able to hold the glue sticks on the glue gun itself. Unfortunately, he didn't publish that model. 6 hours later, I have created one that is similar.…
I store my superglue (cyanoacrylate) bottles in the fridge, because it's supposed to extend the life, however they keep falling over. This is a simple rack to keep them upright. It's intended for "Everbuild" 20g bottles, from Toolstation,…
This a holder for Tite bond glue so that it stays upside-down. Print Settings Printer Brand: Monoprice Printer: Maker Select V2 Rafts: Doesn't Matter Supports: Yes Infill: 20% Category: 3D Printing
This is a glueable clip-in backplate for the IKEA MITTLED lighting system. The design snaps into the original MITTLED mounting ring that comes with the product. You can use the original mount as an alignment template, clip in and then…
This is a remix of another holder made for Skadis. I have adapted it to use HSW connectors.
Support pour 2 types de colle plus bouteille de alcool a friction. 2 vis numero 6 pour le support. Imprimer en Petg.
My version of an organizer for all of my plastic glue, superglues, accelerators, Xacto knife, and steel ruler to help keep me from spilling them on my work bench. I kept knocking things over and spilling them. Among other things, I have…
This is a compact 80mm sliding lock designed to be printed in two interlocking pieces. The parts print already assembled and are free once removed from the build plate. Designed to be glued onto flat surfaces — no screws required.…
With just 12g of filament and 20 min you get a neat mini pad with spreader and scraper for your woodworking gluing.
Kraftprotz Glue Side Shelf Holder for Bambu Lab Printers Keep your glue/adhesive right where you need it with this dedicated side shelf holder designed specifically for Kraftprotz glue . This accessory mounts neatly to your Bambu Lab…
Case for Tilswall W106S glue gun and accessories. I used M3 x 0.5 x 30mm Socket head cap screws but any M3 30mm should work fine. You'll need 6 total, tow for the hinges, two for the locking clips to rotate on, and two to latch onto to…
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
This is an original shoes organizerdesign created from scratch and optimized for 3D printing. Material: PLA Machine: Creality K1 MAX
5° angled diammeter for head 25mm for better performance should be inserted screws M4x30mm designed 2 dimmensional holes for glue by silicone to tile
this is a model of the Ferrari 308 an absolute classic pretty car o made this model to learn form on fusion and can i say it was a pretty hard project but i am happy with how it came out it requires no glue just put the wheels in and its…
This is a simple, purpose-built holder designed specifically for the GH1200 super glue bottle—because let’s be honest… this is one of those tools I don’t use often, but when I need it, I want to find it quickly instead of digging in a…
EN : Since I don’t use Gridfinity, but its excellent design is perfect for the glue stick, I modified it for my own purposes. I also revised the mesh, which allowed me to reduce the file size by over 90%. Material : PET (eSun green…
I have some old cassettes and wanted to store them properly. Really like the Cassette Carousel, but wanted to see if it can be assembled without glue. And turns out it can be done. It is assembled by sliding cassette parts to top and…
EN : Based on the great model by DusBus , I designed a lid for it. See also Material : PLA, PETG Layers : 0.3mm Supports : none BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB DE : Basierend auf dem tollen…
EN : After I finished the first lid, I realized I still had quite a few accessories—such as the battery charging station, the cable, and the “Bosch Gluey Halter” ( https://www.printables.com/model/480863-bosch-gluey-halter)—that didn't…
Crochet Creeper - Easy to print, No glue or supports, Just fun! Crochet Creeper is a free, simplified version of the full-featured Craft-A-Creeper . Designed for simplicity and accessibility, this model lets you create a multicolor…
Thanks to @Vaarlion_340250 for the Original Model.
File to use as a cutting tool for loose fit ECAS fittings, to be installed with a small amount of glue. Pulled from the TurtleNeck Plus design.
just needed the original model to be a little longer to speed up application.
