Glue-on 1x2 Angled Gridfinity Baseplates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These Gridfinity 1x2 baseplates have flat bottoms so you can glue or velcro them. There are a few different angles.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 52
- Makes
- 0
- Views
- 553
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
These are 1x2 gridfinity baseplates. There is one flat one and the rest are at angles, in 5º increments up to 20º. This can help accommodate a leaning surface, or it can point the gridfinity module at an angle. For example, this lets gravity collect things on one side of a module, or makes it easier to look inside, etc.
These are minimalist baseplates.
If you reslice these, I recommend:
- External perimeters first
- Infill 10% gyroid
- Only one layer of skirt - additional layers don't do anything useful that I can tell.
This is one of three angle baseplate models. The other two are:
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity