Glue-on 1x2 Angled Gridfinity Baseplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These Gridfinity 1x2 baseplates have flat bottoms so you can glue or velcro them. There are a few different angles.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
These are 1x2 gridfinity baseplates. There is one flat one and the rest are at angles, in 5º increments up to 20º. This can help accommodate a leaning surface, or it can point the gridfinity module at an angle. For example, this lets gravity collect things on one side of a module, or makes it easier to look inside, etc.
These are minimalist baseplates.
If you reslice these, I recommend:
- External perimeters first
- Infill 10% gyroid
- Only one layer of skirt - additional layers don't do anything useful that I can tell.
This is one of three angle baseplate models. The other two are:
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity