Festool Domino Glue Nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue nozzles, flushing adapter, and storage tray for the Festool Domino mortise sizes 5, 6, 8, and 10.
- Rating
- 4.333 / 5
- Likes
- 164
- Downloads
- 828
- Makes
- 4
- Views
- 5,023
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These prints are glue nozzles for the Festool Domino sizes 5, 6, 8, and 10mm. Also included are a flushing adapter to clean the nozzles and a storage tray. The glue nozzle threads are sized to fit a Titebond 16 oz. glue bottle. The flushing adapter fits on a standard (U.S.) hose coupling screw thread size 0.75-11.5NH and NHR. (ANSI/ASME B1.20.7-1991). A garden hose washer/gasket and a size 111 O-ring are required for the adapter.
For the glue nozzles, I have had the best results printing with 0.16mm layer height and with the nozzle tip down or up with concentric support at 5% fill. The adapter needs no support. I have attached an example of the settings that I used for success.
I have been working on a revised version (still a work in progress) to separate each nozzle from the cap, use threaded inserts, and o-ring seals. By request, I have uploaded the Fusion 360 file for the Titebond glue bottle cap (including flushing adapter and a cap for a Pizzi glue gun).