Festool Domino Glue Nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue nozzles, flushing adapter, and storage tray for the Festool Domino mortise sizes 5, 6, 8, and 10.
- Ocena
- 4,333 / 5
- Polubienia
- 164
- Pobrania
- 828
- Wydruki
- 4
- Wyświetlenia
- 5023
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These prints are glue nozzles for the Festool Domino sizes 5, 6, 8, and 10mm. Also included are a flushing adapter to clean the nozzles and a storage tray. The glue nozzle threads are sized to fit a Titebond 16 oz. glue bottle. The flushing adapter fits on a standard (U.S.) hose coupling screw thread size 0.75-11.5NH and NHR. (ANSI/ASME B1.20.7-1991). A garden hose washer/gasket and a size 111 O-ring are required for the adapter.
For the glue nozzles, I have had the best results printing with 0.16mm layer height and with the nozzle tip down or up with concentric support at 5% fill. The adapter needs no support. I have attached an example of the settings that I used for success.
I have been working on a revised version (still a work in progress) to separate each nozzle from the cap, use threaded inserts, and o-ring seals. By request, I have uploaded the Fusion 360 file for the Titebond glue bottle cap (including flushing adapter and a cap for a Pizzi glue gun).