Small Glue / Epoxy Mixing Tray - With "Finger Protection"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue / Epoxy mixing tray with thumb recess for much better tray control - Light weight - About 8 grams of filament.
- Rating
- 5 / 5
- Likes
- 128
- Downloads
- 713
- Makes
- 12
- Views
- 1,348
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The ergonomic thumb recess provides much better control, helps keep your fingers away from the nasty, sticky stuff in the tray.
Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray
in horizonal mode, or the LH tray in vertical mode (see pictures).Different styles of mix/application wands.
This remix is approximately the same overall print size as the version by @sketchmeto_4171426.
Uses less than 3 meters of 1.75mm filament per unit.
If you download this design, PLEASE remember to "Like" it if it fits your needs. "Likes" are as important as "Downloads" in earning a few "Prusameters".
The included .3mf file uses the Prusa 0.20mm "structural" print setting. However, many will be able to run the "speed" and/or 0.25mm settings without any issues when printing PLA.
If you prefer a taller side wall (z-axis) or larger tray (x/y axis), simply resize the object in your slicer to the larger dimensions.
As of October 2026, more than 50% of all that who view this model have downloaded it.