Small Glue / Epoxy Mixing Tray - With "Finger Protection"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue / Epoxy mixing tray with thumb recess for much better tray control - Light weight - About 8 grams of filament.
- Ocena
- 5 / 5
- Polubienia
- 132
- Pobrania
- 724
- Wydruki
- 13
- Wyświetlenia
- 1369
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The ergonomic thumb recess provides much better control, helps keep your fingers away from the nasty, sticky stuff in the tray.
Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray
in horizonal mode, or the LH tray in vertical mode (see pictures).Different styles of mix/application wands.
This remix is approximately the same overall print size as the version by @sketchmeto_4171426.
Uses less than 3 meters of 1.75mm filament per unit.
If you download this design, PLEASE remember to "Like" it if it fits your needs. "Likes" are as important as "Downloads" in earning a few "Prusameters".
The included .3mf file uses the Prusa 0.20mm "structural" print setting. However, many will be able to run the "speed" and/or 0.25mm settings without any issues when printing PLA.
If you prefer a taller side wall (z-axis) or larger tray (x/y axis), simply resize the object in your slicer to the larger dimensions.
As of October 2026, more than 50% of all that who view this model have downloaded it.