Counting matching models…
Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
I made this lid because I lost the stock one, this one is made out of TPU so it is flexible and works just like the stock one or even better, because TPU is stronger.
This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…
To make painting of parts easier I made some painter's pyramids to elevate the workpiece (thought there must be a better way than putting nails in strips of wood every time.) There are already a lot of designs out there, but I wanted to…
Printed in PLA with no special changes to the standard settings.
As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…
After not finding a rack for my 30mm paints, I decided to create one! This rack is made up of 24 spaces for your 30mm/ml paints It prints easily, with only a 190g cost in less than 5h! It is distributed in 6x4 although if I see a good…
This is a remix of the Hoto Electric Screwdriver Gridfinity by ethanthompson here on Printables. I needed a box to fit the Paintron Electric Screwdriver from Amazon. I used PrusaSlicer's cut tool to chop the original up and overlay the…
Paint Strainers with Filter for Airbrash Print heiht 0.2 Apply superglue for attach 190mkm filter.
Freak XL insert case. Fits four inserts. Uses eight 6X3 mm magnets to hold the lid on. Use a little bit of super glue to hold the magnets in. They should be snug, but not hard to push in. They are not meant to be friction fit. I used ABS,…
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Running Horses . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size…
Cut off of the top section on the minigun barrels.Can be used for items like pencils,pens,paint brushes,straws,sharpies,various,markers and the list goes on. 74mm high,94mm diameter.Please feel free to rate and review.
MARKAL PAINT MARKER MAGNETIC HOLDER 5X ~14.5MM DIA MARKERS. PRINT BASE AND 2 TABS. INSERT 2X 3/8" DIAMTER X 1/4" MAGS THEN PRESS IN THE TABS. SHOULD WORK WITH OTHER SIMILAR SIZED MARKERS. LINK TO MARKER…
Holder for 7 mediu paint tubes. I adjusted the original model to fit in Van Gogh Oil paints.
Want to use a painters pole to hold up your Starlink Mini? This adapter fits the plate that comes with the unit. A threaded hole is provided that fits the standard painters pole thread. I would print with 4 walls and a decent amount of…
Design inspired by pieces assembled to create minimalist paintings and ornaments. Print them in different colors or materials and personalize every detail. The only limit is your imagination! Share your designs and creations in the…
Depending on your printer, you may have problems printing thin spikes which are often used for painting stand. with this model you can prin them flat on the bed and reduce the needed accuracy. Also some printers and filaments my get you…
Spray priming the Ultimate Showdown Board looked like a nightmare, with the small tiles flying around in the wind or under the force of the spray paint. I designed this set of helpers to hold the tiles in place so they could be primed…
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Anycubic Black Transmission Distance: 0.3 PLA+ Anycubic Grey Transmission Distance: 2.2 PLA+ Elegoo White Transmission Distance: 5.4 This…
Here is a simple Hueforge for everyone of a Knight. The “original” Artpiece was AI generated and i put it in Hueforge If you own a simple printer like me who can only support one fillament at a time, use the custome gcode in your Slicer…
Alle Seiten der „Pyramide" sind gleich lang, somit ist ein Ausrichten nicht notwendig. All sides of the “pyramid” are the same length, so alignment is not necessary.
tested on both tubes works fine, and a solid build. made it in both 4mm and 2mm sqweese :)
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Angled brush rest to keep water away from ferrule. Attached tray to catch drips.
As requested by a Reddit user. It also fits at least The Army Painter Speed Paint bottles, which are quite similar.
Slip these jigs onto the 3mm stainless steel wire and slide it into the holes where the wire enters the wooden balustrade upright then paint the upright without getting paint on the wire. Printed with minimal infill in PLA (using the…
This model is a painting staining stand designed so that you don't have to miss any spots while spraying, and so that you don't set a wet side on your surface and ruin your paint job. Its about 6.25 inches wide and 8 inches long (between…
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Paint Spray hexagon stencil 21x21 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
Rack for 10ml Tamiya paint jars. Can be used with imperial (1 inch on center) pegboard. Use with metric pegboard will require adjustment of hook and peg locations. Printed with PETG and perimeters to 4, to make hooks and pegs sturdier.…
Customize This model is parametric - it's designed for customization. You can easily change parameters like lenght, width, angle, tolerance in Fusion 360 . If you don't have this program , you can choose from one of the examples I've…
Have fun 0,2 2perimitter 10% infill use adaptiv for better Modells
1 version for sandana style 1 version for Dye style 2/22/26 1 thinner version with angled slots
Print the hopper in PETG and the cap in TPU. The cap will slide on to the end of the hopper if you carefully stretch it. 2/22/26 Added a few more versions to use with 10 round tubes.
I needed a neat way to store my son's model paints and couldn't find one that would store well and allow the number on the bottles to be easily read, so I designed this tray. Should work in any material, and an easy print with no…
I remade the model so that you dont have to print the shaft, which was bound to be olong and probably not particularly solid. it now has a hole to fit a ¼ inch or 6mm dowel of your choice. I tried it, and it fit perfectly on the first try…
Modified Dark Squirrel Designs (@DarkSquirrelDesigns) stand design to include more smaller brush holders.
As a small hobbyist, I found I needed a way to keep all of my paints on my Ikea skadis boards while maximizing the space. I have over 200 bottles of paint and the desktop was getting so cluttered. This design allows the paint to be at an…
Hardware Needed: (1) 1/4x28 Bolt - 1.5" or longer (1) 1/4x28 Nut
paint rack for 17mm dropper bottles. Model dimensions: 330x240mm approximately
Vallejo paint rack - suitable for 17ml bottles - 23 paints fit in. dimensions 140x130mm
Wet palette for standard melamin sponge. Dimensions for 6x10x2cm, can be bought on Aliexpress. Best to print in 2 different colors, probably gray/white and yellow/orange, though can be whatever you want. Features: Paper tray/storage that…
This lightweight and efficient paint brush is entirely 3D printed in one piece – no supports required! Designed for quick and clean prints, it’s ideal for painting, dusting off your printer, cleaning electronics, or light hobby work. ✅…
It's a rest for up to 5 paint brushes, recommend using 2 one in each end. But one should work perfectly fine. Print how you want should not require supports, did 0.4 nozzel 15% infil and .2 layer hight.
I made this model to allow me to rotate a Strat style body while applying a wipe on poly finish, You will need a 29-30mm rod for the main shaft I used a 29mm/1" 1/8 broom handle parts connect with wood screws and drill pilot holes in the…
Paint stand - easy to print suport to paint two sides at once Simple and easy print with no supports To be mounted with regular wood screws or without :) Infill 15%
I searched around to find a paint holder that does not use print supports for the pegboard hooks but I could not find one. I made this paint holder that uses the universal hook for pegboards/Skadis so it can easily be attached to the…
Disponible avec ou sans rebord ------------------------------------------ Available with or without rim
Magnetized tops for Redgrass painting handle with grooves for 50 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. Attention: Since the 50 mm bases are too big, the rack for…
I saw something similar for tool attachments and wanted it for my paints. The base is for both paint pots and dropper bottles, you are going to need a 608 ballbearing.
A print in place model for you to print so that you can easily store your citadel paint pots. Each box can hold up to 5 pots of citadel paint 2 sizes: 12ml size pots and 18ml size pots The 18ml storage box can store 18ml and 12ml paint pots
Unleash your creativity with the Blade Valkyrie Painting Miniature . This dynamic warrior figure, armed with a sword and shield, captures the fierce spirit of a Valkyrie in battle. Designed for hobbyists, painters, and collectors, it…
V3 OUT NOW! 21 millimeter barrel mount for any GoPro or action camera. Takes around an hour to print depending on settings used. I printed it on 30% infill, with .5mm thick top/bottom and sides. If you print it on higher infill, it will…
Paintstation geegnet für Din A3 Schneidematte basierend auf eine Skadis Board.
This is a Multibin for Multiboard container > 3x3 x 0.5 height for the Apple Barrel (appleBarrel) paints, but also works for most other paints - just will be too large for the Valejo sets. This is for 13 paints
Paint shaker for miniatures. It's designed to fit Vallejo and citadel botles. --UPDATED-- NEW PRINTING PROFILE (PORTABLE AND RECHARGEABLE) TWO ADDITIONAL PRINTING PROFILES HAVE BEEN ADDED: 1. Base adapted for older wired model, for…
UPDATE 27 Jan 2026: Added a scaled up 23ml variant. A simple 4x2 paint organiser. Use it as an insert for drawers, boxes etc or simply lay it on your workbench/table. Fits Tamiya, Mr Hobby, Mr Color paints well. Test printed in Black PLA…
This 3D-printed jewelry-making assistant is designed to make painting and assembling handmade wooden bead jewelry easier, cleaner, and more organized. The design features three useful sections: 1. **Painting area:** A board with 14 holes…
Are you looking for a highly customizable, modular way to organize your Army Painter/Valley/Tamiya/etc. hobby paints? With this system you can build a stand that perfectly suits your needs. The Printables Store version is the latest…
This is a box to store paint sticks. It has 2 compartments, 1 for the stick and one for the alligator clips. In addition it has 3.2 holes for using the sticks Compatible with
Looking for a way to keep the kids entertained during those long winter evenings? These ornaments are more than just decorations—they are a blank canvas for your child's imagination. The concept is simple: We provide the shape and…
Anya Spy x Family, Can be printed in 3 parts seperated to be painted with acrylic.
Paint miniature holder with swapable caps [EN] Simple handle, hot-swap caps for single or 4-5 minis. Also you can install 2 magnets 10x4 with hole 4mm. [RU] Простая рукоять, быстросъёмные крышки для одиночных и нескольких миниатюр. В…
Golf ball spray paint jig that can paint up to 7 golf balls with stencil patterns at a time using compatible stencils (below). Ergonomic design makes it easy to open and close jig assembly to better grip and hold ball in place while…
A paint brush stand that does not fall over easily. The bottom part is hollow and can be filled with sand, the lid snaps shut but a few drops of glue does not hurt. Prints in separate pieces and glues together. The stalk comes in 2…
I made a simple paint tube carousel / lazy susan for my wife's Liquitex Acryilic Paints it holds 15 of the 4oz, 2oz and 0.74oz tubes and tubes with the same cap size. It also has a smaller recess for holding smaller tubes of paint (brands…
I made this Artist's Paintbrush Organizer for my wife's many, many paintbrushes. It has compartments of many differents sizes as well as a "tip shaper" for wedging the brush tips. If you found this useful, please consider a SMALL DONATION…
I am having issues with my printer and cheap filament and I'm using the last of the ABS I have in the color she wants. I would suggest printing in a easier to work with filament such as PLA or PETG so that you will not need brim like I do…
A snap fit holder I made for holding paint markers inside my clipboard. I printed in PETG and attached to my clipboard with double sided tape. In PETG they are rather slippery, but my clipboard itself contains them from sliding axially.…
Compact 3D-Printable paint mixer designed for hobby acrylic paints. It securely fits Vallejo 17ml and Army Painter 18ml bottles. There are 2 versions of paint holder. For one or two bottles. Do not use both versions simultaneously, they…
A simple tool designed to help make painting eyes on garage kits easier, more comfortable, and more dust-free. Simply choose the hole size that is closest to the peg of the piece, then insert along with some blue tack or clay to get the…
I'm presenting a Japanese-style painting. It is made in three colors on a monochrome 3D printer. If you want to try yourself as an artist, you canarrange the color replace ment by layers yourself. Believe me, it's a very interesting and…
Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to print it double the normal height to make sure its strong enough.
These clips will allow you to easily use a Proflex (other other "universal") strap on the Empire Vents family of masks (E-Vent, E-Flex, Helix). The stock mask clips could also be used, but have two issues: 1) You need to cut off the…
Instead of a uniform grid, this holder is designed to accommodate brushes of various sizes, with multiple hole size options. Most holes can hold 2–3 thin brushes. And well… I simply prefer the more organic look over a uniform grid The…
I’ve been looking for a perfect paint brush holder and organizer for ages. I printed and tested a lot of them, but none of them stayed on my desk for long. This one finally fits my needs - it’s exactly what I was looking for. It might not…
Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to print it double the normal height to make sure its strong enough. This is number two of my painting…
Can be printed on PLA, 10% infill, NO SUPPORTS! Also, there is a model with the hook moved one position, if needed to fit at the border of the skadis board
This is a remix of the mirrored Paint Bottle Holder 32.6mm short version by DeGnoss The mirrored versions of the bottom parts were missing the ridge where the top part can slot in. For now I only fixed the 3x2 mirrored bottom model. Image…
Small paint mixing palettes perfect for last filament meters on the spool, available in 15, 10 and 5 field variants
Small paint mixing palettes perfect for last filament meters on the spool, available in 15, 10 and 5 field variants.
Small paint mixing palettes perfect for last filament meters on the spool, available in 2 variants.
I had too many paper plates that I used to spray paint various small wooden pieces. I ended up creating a system that was using one paper plate for each color of spray paint I was using so that I could have upwards of 15 different colors…
Printed parts to build a modern SPump including custom gripframes and Autotrigger mod. Your Marker needs to have a common threaded Low Pressure Chamber/Front Plug to fit the Pump Guide. Tested with the following Markers (Help me expand…
Painted with four colors: Black, Blood Red, Bone, Lighter Red.
My wife kept knocking the little sample model paints, that came with her model Fiat 500, over. This little holder stops that from happening. Simple to print with zero supports. The hole diameter is 23mm and is 17mm deep. NOTE: For Citadel…
Simple design that provides minimal contact on boards that you are painting to allow for the best possible paint that you can provide.
Are you tired of paint cups that are to big, to deep, to awkward, to hard to clean... or built in. Looking for something that goldilocks would say is "Just Right"... Look no further! Paint cups are shallow so your not putting to much…
🏛 Historic Background The EMD F7 was a 1,500 HP diesel-electric locomotive built between 1949 and 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel . Originally designed for freight service, the F7 also…
Remake - No idea where this came from, unfortunately. Seen here: Good Demo! But it works absolutely awesome, so I had to share. Just scale to size with your slicer for bigger rolls of tape.
A paint stand with an airbrush. The cells are installed using 5x2 mm magnets.
