Horizontal Paintbrush Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This is an elevated paintbrush stand designed for use by a mouth painter. The Horizontal Paintbrush Stand has a series of spaced horizontal slots to rest the brush during use and enable the painter to switch between brushes independently. The stand has a female 1/4″-20 UNC connection for mounting using commercially available camera mounting equipment.
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: No
Rafts: No
Bill of Materials
This build consists of 3D printable parts and some commercial off-the-shelf hardware. Refer to the Maker Guide for instructions on what parts to obtain, and how to print the parts. There are two design variants: A and B.
Find the bill of materials and additional documents on https://github.com/makersmakingchange/horizontal-paintbrush-stand
Build Tutorial
Printed assembly manual can be found in the Files tab.
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea