Counting matching models…
Remixes the main knob so it can be slip-fitted on a skywatcher ST80 stock focuser knob. If you want truly smooth operation , see the anti-wiggle needle mod here :…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
Altitude Select Knob for push pull encoder and 100/1000 select on A320 FCU adapted for Santi Luib III Mark 2
Just a handy small piece which allows to mount a Headlight straight to the BBB Stems that are compatible with the GoFix Mount from BBB. Listed models on BBB website: BHS 09, 37 und 38Di2 but also fits the Actionstem BHS-52 as you see For…
We got a set of Enbrighten Vibe Eternity LED lights that are intended to go on your eves, and shine against the house for accent. The problem is, we used them on an awning support frame, so they don't shine right next to the house, and…
Guard plate b1 and b2 now can have metal hinges mounted with m3 screws and nuts aliexpress hinges: https://it.aliexpress.com/item/1005006171879918.html?spm=a2g0o.order_list.order_list_main.5.22793696tWxJ7x&gatewayAdapt=glo2ita
Case for a Geekwire gen6 UPS that keeps my PI powered and safely shuts down if 12v power from MacArthur hat fails.
Categoría : Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso : Para abrir latas mayoritariamente de conservas y/o con anillas grandes y de gran recorrido de apertura (sardinas, mejillones, etc.) Recomendaciones : Los…
Phone Stand adapted to fit Xiaomi 13/14 Ultra Phone camera bump. Might fit newer Xiaomi phones.
Display arm extended and angle adjusted by 7 degrees
I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not…
DF54 has two holes, against 1 in DF64, I remixed the original model. The two holes were fixed a little below the one in the version for DF64 so that the dosing cup can get closer to the chute. Publishing here for someone to print and test…
Can Hand Holder for SUP-Board, Kajak… https://www.printables.com/model/980526-stand-up-paddleboard-05-l-dosen-07-l-thermoskannen
This is my first 3d project upload. I remixed a hot wheels launcher to make an adapted bocce launcher. This was a way to make an accessible bocce launcher for use during adapted physical education classes. This is the 4th or th…
This MOD replaces the stock 4010 fan with a 5015 layer fan,a 3010 for heatsink cooling and an optimized fan duct. 5015 Fan improves air flow and air volume. It's adjustable in height. 3010 fan, replaces the crappy and noisy one that needs…
adapted some of the parts to hold lenses from fuji film quick snap disposable cameras
Obs: This mount was primarily designed to be used with my tilt, both for desk and wall mounting, which can be found at this link: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount I have Reolink…
Link to the chain To install it, you will need: 1) Screw M3x10 ISO7379 (10mm is the size of the smooth part! To this length, 6mm threaded parts are added, a total of 16mm!) Or screw the limiter onto a regular M3x16, the file is available…
I like Tomasz' original Version for the Prusa I3 MK3, but I own a smaller Prusa Mini+, so I changed some things. When I started I wasn't quite familiar with FreeCAD and Prusa-Slicer, so I had some learnings and of course I would make it…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
Add supports under indicator Print ring separately (100% scale) PETG 0.2mm, 20% grid infill, nozzle 0.4
This is a remix of the original Fan Shroud model to allow mounting on the Hydra Fan Duct: https://www.printables.com/model/169197-hydra-fan-duct-tool-change-system-for-ender-3-ende The duct is no more straight but slightly pointing…
GEN2 Decor Handles - Adjusted for 12mm screws instead of the default 16mm and a bit ‘more chamfered’ for esthetics.
Updated to: Use a smaller diameter main knob for more clearance from the diagonal on a C5. The new main knob is the same diameter as EleusisT's original. Use snap fit connectors to secure the reducers' support to the secured base plate.…
Remixes the main knob so it can be slip-fitted on a Bresser Hexafoc Focuser. Tested on Bresser AR102s/600 refractor but it should be working for any Bresser Hexafoc 2.5" Focuser (?)(TBC). Adds an attachment plate that fits the focuser…
As for @JeremyKREBS_559468's design, you may need to remove the carboard organizer from the box, fold the carboard around the printed organizer before reinserting it into the box. However, the fit could be better with thinner sleeves or…
Remixed the main button so it can be installed on a Skywatcher Crayford focus button. If you want really smooth operation, check out the anti-wiggle needle mod here:…
I modified this to attach to Molle as opposed to the knife. Thank you for doing the work on a great fire steel holder.
This is a knob primarily thought for Ikea's Kallax series using M3 hardware because that's what most makers have at home. There are two print files, the knob itself (one with a chamfer one without) and a “base” you can put on your screw…
adapted to be used with https://github.com/will127534/CSI-2-FourLane-HDMI-Extender allows 2x HDMI connection from the back side of the Pi. Screw holes adapted for M2.5 flat head. Two models, one with flush top and the other with increased…
The adapter has been modified to fit an Ikea Skadis board. I found another version similar but it was too tight so I decided to create my own. This is a remix of the filler Spool holder and you will need to print the rest of those files…
I resized the model to work with the Teradek Colr. Also, made cutouts for BNC cable.
Introduction: SteveT did a great job collating parts and doing a writeup of the assembly, I just didn't pay close attention when buying parts and ordered the wrong bins. These were branded “Kichly” rather than “Skroam”; the biggest…
This is a set of adapted V2 BeltClamps if you use the ChaoticLabs Carbon Fiber Bracket Kit together with TorxFighter Zero offset Clamped GE5C Mount for Voron 2.4 + Beefy Front Idler The V2 BeltClamp design is used where possible and the…
Altitude Select Knob for push pull encoder and 100/1000 select on A320 FCU adapted for Santi Luib III Mark 2
Remix of Stigern's great model, with screw holes adapted for 2.5mm Ø countersunk screws (2.5mm x 20mm screws used in my case, EAN: 4053199302444 )
Link to Patreon :) https://www.patreon.com/Artoys3dPrint Batman Venom and Skeletor pack 25cm high each to be printed in one piece. Batman Venom y Skeletor pack pack de 25cm de alto c/u a imprimir en una sola pieza. Best Quality possible…
just some rigid corner brackets with different versions, you will need some supports for the 8mm and 20mm version
most din CB's have a notch behind them which does not allow them to clip into the original part, so that plate was remov
This is a slight modification in the LED Light Bar to fit a 9x17.8mm u-profile. Para os Brasileiros que estão tentando montar o LED Light Bar, esta é uma versão modificada que encaixa perfeitamente no seguinte perfil de alumínio:…
I reverse engineered the AUKEY Table lamp adapter pattern and put it on the bottom of the moon. The moon now mounts into the AUKEY lamp, and can have multiple RGB colors or bright nesses…. the AUKEY Lamp base is sturdy and supports the…
Ryobi One 18v router base adapted for using with router bushing
Original stand and front cover still fit, please get the originals there, or use the ones also in the 3mf i widened the usb hole (my usb port was on the side, not the middle) Now the board is flippable. And i adjusted the bar to fit the…
Summary: I'm a big fan of @PrintingPerspective's magnetic backplate for the V0.2 but my only 6010 fan was rather loud. Files: 6010 to 4010 fan adapter Since I had already printed the 6010 magnetic backplate I designed an adapter to…
Game Boy inserts for cassete box I buy from aliexpress some cassete boxes for my GBA games and discovered they where incompatible (not close well) so I modfied some ones to make it fit GB/GBC made by @EntirelyTom_2031571 GBA made by…
Just a handy small piece which allows to mount a Headlight straight to the BBB Stems that are compatible with the GoFix Mount from BBB. Listed models on BBB website: BHS 09, 37 und 38Di2 but also fits the Actionstem BHS-52 as you see For…
Remix Description: Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL…
I made a compact ultralight slip case to protect my new DJI Mini 3 drone and RC-N1 flight controller when motorcycle camping. It's as small and lightweight as I could make it. Each of the overlapping side walls are 1.5 mm thick, so the…
Bento Box Filter Remix – 5020 Fan + Quick-Release A remixed Voron “Bento Box” air filter with a 5020 blower for more airflow and a quick-release lock for easy filter swaps. Still uses 4 magnets and the original filter cartridge (download…
Remix of the LED holder for a different style of LED light: https://www.amazon.co.uk/dp/B0DJ73G4PX?ref=ppx_yo2ov_dt_b_fe
Fish feeder, with bottle hopper adapted for arduino case and sg90Fish feeder, with bottle hopper adapted for arduino case and sg90 All printed with PLA Only change I really made was to the base, so the the arduino nano case can fit in…
For the counterweight, I used a lead slab of approx 150 x 90 x 1.6 mm that I rolled up to a cylinder of 90 mm long and about 16 mm in diameter. This goes into the 3D printed counterweight holder with a bit of hot glue. The ball bearings I…
model reshaped to fit ikea 205.431.57 led light
I just mixed up GreaseMonkeys brilliant small power button model , it's been adapted to be used with the Wokyis Dock to combat the thicker edge of the dock itself and helps stop the annoying way you have to manhandle the dock and mac mini…
We got a set of Enbrighten Vibe Eternity LED lights that are intended to go on your eves, and shine against the house for accent. The problem is, we used them on an awning support frame, so they don't shine right next to the house, and…
A pot lid rack that prints in lil sections - adapted original model to make it a bit nicer by having clean start and end parts. Original model: https://www.printables.com/model/1178526-chaining-pot-lid-rack. Thanks to…
Added 1mm more space for the display thickness Added buttons Customized back plate
Makes it compatible with the Magni. There is a model built in, as well as wing adapters for the original.
Adapter looked pretty sketchy with all those naked pins, so i made this enclosurure. I've got this adapter with fysetc sb combo v2 board. It is used with umbilical cable, to connect toolboard to USB. Two parts. No supports. Snap-fit.…
The modified version is the bottom one added holes to reduce printing time and material. Time roughly 30seconds a print but if your doing a large volume of 100 that's around 50 minutes and a load material saved. This is linked to the…
This is a remix of the base which allows for the use of DIN912 M2 × 8mm screws as the hinge. M3 seemed to be too much, so I went down to 2mm, which fits quite neatly. You can use the original lid from the LTT AM4 CPU Case. The M2 screw…
Guard plate b1 and b2 now can have metal hinges mounted with m3 screws and nuts aliexpress hinges: https://it.aliexpress.com/item/1005006171879918.html?spm=a2g0o.order_list.order_list_main.5.22793696tWxJ7x&gatewayAdapt=glo2ita
Case for a Geekwire gen6 UPS that keeps my PI powered and safely shuts down if 12v power from MacArthur hat fails.
I stumbled upon an issue with the Orbiter V2.5 not fitting the original toolhead from Rook 2020 mk2 build. This model hopefully fixes all the issues I had with it. Hope it helps somebody else as well. What was redone the two main wholes…
Categoría : Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso : Para abrir latas mayoritariamente de conservas y/o con anillas grandes y de gran recorrido de apertura (sardinas, mejillones, etc.) Recomendaciones : Los…
Currently the model is at 1:1 scale which won't fit most printers (table top dimensions are 392mm x 335 mm). Tolerance are 0.2mm between the parts, so some rework might be necessary if scaled down for printing. I'm still working on a…
Phone Stand adapted to fit Xiaomi 13/14 Ultra Phone camera bump. Might fit newer Xiaomi phones.
Categoría : Producto de apoyo Contexto de uso: Alimentación y ocio Modo de uso : Para abrir latas mayoritariamente de conservas y/o con anillas grandes y de gran recorrido de apertura (sardinas, mejillones, etc.) Recomendaciones : Los…
I liked the height, the design and the adjustability and just didn't have the right screws at hand. So I adjusted the model for the M3s that I had. Because those didn't fixate the sights in the notches of the rail due to the smaller…
Display arm extended and angle adjusted by 7 degrees
Amended faceplate to fit https://www.amazon.ca/dp/B098L7WJ4C?th=1 USB splitter ports
The Saddle geometry has been modified to fit dryboxes that feature a recessed grip along the edge. In the original desig
I decided to install JBL GX328 speakers instead of the Infinity speakers. I chose these speakers for their lower impedance, which more closely matches the stock speakers' 2-ohm impedance in my JBL system. I found out that they will not…
Allows you to fill the empty space and insert the health point wheels
Moves the focus distance of the Zenit IR-2 1.6/85 from 3m to infinity to a more usable range. ONLY USE ON ADAPTED MIRRORLESS , I chose EF to avoid extra bulk, but if used on an actual EF body the zenit's non standard rear element with…
Voron StealthBurner FilamATrix adapted for bdpressureE i wanted to keep using the e3d revo system, so i modified the original model and used the heatsink from an aftermarket model to make it work. parts used: M2.5 2pcs, 8mm (for fitting…
I needed a spool holder that fit small diameter filament spools from local brands. Uses same pin and roller as the original. Removed the logo. I printed it in petg, using it with printed bearings, decently tight fit on the printer, no…
Adaptada la carcasa para un NRF52840 y un SX1262 Tambien he agrandado el hueco de la bateria, ahora tenemos un hueco de 41mm x 25mm aprox., yo le he puesto una bateria de 1350 mAh y un bms y cabe perfecta. Dejad en comentarios si teneis…
Really liked the adjustable spool holder but needed to adapt the side plates to suit my i3 steel frame. Adapted from and made to suit > https://www.thingiverse.com/thing:2362427 Category: 3D Printing
EN: Adapted for use with 235x235 HotBed and BLtouch, using sensorless homing Belt Tensioner: 2x M3 nuts, 2x M3x35 bolts and M3x6 are used on the belt tensioner. The M3x6 is screwed into the body of the tensioner and the M3 nuts and bolts…
This is nothing particularly special. I created it to go with Dakanzla's magnetic tiles here: https://www.thingiverse.com/thing:1238980 If you want to know how I got the gold sheen on the paint job, I stood about 6 foot back with a can of…
Easily change spools by just lifting one end of the bar. This works with either an 8mm rod (like the one that comes with the stock spool holder) or a length of 1/2 inch pvc pipe as the spindle. Fits on top of the .75" square tube uprights…
I didn't like the design of the Bondtech IR filament sensor adapter for the Mk2/s upgrade extruder ( https://github.com/BondtechAB/Bondtech_Prusa_i3/tree/master/CAD-Files/MK3s%20Sensor%20Add-On ), so I made my own. this one flips the…
Someone asked where to get extra tops for the citadel handle so i did a simple smash together of existing creations to fit. Get the clampy bits for the top from icnorman here https://www.thingiverse.com/thing:4152882 Made using the…
Adapted design for assembly without together screw. Screws replaced with plastic snap-in latches. Original thing: https://www.thingiverse.com/thing:922740 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
NG extruder fan shroud 5015 adapted since I like to use 0.6 nozzle I also made a volcano adaption for this fan shroud with 5015 blower
V2 is available now. As requested, we've lowered the handle (consequently, the siphon), so the draining action should now start at about 2/3 of the cup. In the original file, the mug would have to be almost full before it started…
UPDATES: Added version with mounting screw holes countersink so knob does not collide with screw head for those using full sized screw heads. This focuser is based on the Crayford design, where a smooth pinion is rolled along a smooth…
I've adapted this model: https://www.thingiverse.com/thing:3369946 Using Meshmixer and a reasonable amount of patience (lol). Print instructions The design was meant to be printed using the MMU2S from Prusa Research. High resolution is…
Drill dust collector adapted to work with a 26mm diameter hose used for washing machine drain pipe. This is part of my other model adapting the same pipe to be used with the Xiaomi Mini vacuum:…
Sasha D's Crayford-style focuser for the Hadley telescope is excellent! I highly, highly recommend it. Focus adjustments are MUCH smoother with the Crayford-style focuser. I ended up stripping the plastic threads on one of the setscrews…
Contributo al sistema "Retractable_Probe_Dock for Klicky Probe e Quickdraw Probe" per Voron di "Tronfu" riadattato alla VzBot. Più che contributo, e un restyle estetico al modello di Eduardo Sousa ma modificando il sistema di regolazione…
Modified V3 Shell to properly fit the Foxeer Wildfire Analog Module
This is a remix of the Voron M4 extruder for Ender 3 V2, see https://vorondesign.com/voron_m4 and https://www.thingiverse.com/thing:4901100 I publish only the modified midsection, which I have optimized for extruding soft TPU, i.e.,…
To lower the angle and reduce the tension on the spool, I've raised the length of the slider aligner pivot by 10 mm. To reduce the friction I use a Capricorn's PTFE tube on the slider aligner arm. I've adapted the tension arm to use a…
I remixed the part to suit my needs better. Its a bit shorter and flatter now and can fit my iso-spraybottle and a brush
I had problems mounting the front part of the Morrigan class, this was only possible by a modification more bad than good (see photos). I have therefore slightly modified the mounting of the part so that it now fits without any problems.
Camera mount model, adapted for my webcam which has a bayonet style mounting connection. FreeCad file is included, so all dimensions of the webcam connection are customizable and only the Prusa attachment side from the original model…
![Argon Neo 5 Top Cover adapted for [MIPI to 4-lane CSI HDMI extension by Will Whang]](https://media.printables.com/media/prints/149aca6e-1acb-409f-bc57-3828ecbed2be/images/13012063_0c86629c-46ee-4dc3-845b-6a4a3a1dc3af_daaa5df0-9d87-4eda-893c-3a7a1d977ece/topcover-extra-height-1.jpg)
