1 / 2
Adapted Bearing Holders for 22x7mm ø8mm Bearings - TIGHTER BEARING PIN
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the pin on the "Carriage-R_Fixed" model with small ridges to create a tighter fit with ø8mm bearings.
- Rating
- 4.8 / 5
- Likes
- 22
- Downloads
- 252
- Makes
- 4
- Views
- 659
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Remix Description:
Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL to be flat on the bed. The other half of the model, “Carriage-L_Fixed” remains as-is.

Due to variable manufacturer tolerances in bearings, please print a test before running a whole batch!
Many thanks to @cmyk_3298375 for the original re-mix!
PETG Recommended for pin deformation and high-temp environment (if using the Polydryer mod for these dryboxes).
Assembly:
- Place the bearing on “Carriage-L_Fixed”/"female" half of the bearing holder.
- Push the pin and the main body of the “Carriage-R_Fixed_Tight Pin Remix”/"male" half of the bearing holder into the bearing and female bearing holder half.
- NOTE: the center pin's ridges will deform as you push it into the bearing, ensuring a tight fit.
- Place flat on table and push hard, and/or use pliers to fully seat the two halves together for a tight fit.
- Verify that the bearing spins freely and does not rub against the walls of the holder.
Happy printing! 😉
