1 / 2
Adapted Bearing Holders for 22x7mm ø8mm Bearings - TIGHTER BEARING PIN
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the pin on the "Carriage-R_Fixed" model with small ridges to create a tighter fit with ø8mm bearings.
- Ocena
- 4,8 / 5
- Polubienia
- 22
- Pobrania
- 252
- Wydruki
- 4
- Wyświetlenia
- 659
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (45)Powiązane
Remix Description:
Added small ridges on bearing pin to create a tighter fit with ø8mm bearings. This ensures the bearing actually rolls on its internal ball bearings, rather than just freely spin around the pin. Also re-oriented the STL to be flat on the bed. The other half of the model, “Carriage-L_Fixed” remains as-is.

Due to variable manufacturer tolerances in bearings, please print a test before running a whole batch!
Many thanks to @cmyk_3298375 for the original re-mix!
PETG Recommended for pin deformation and high-temp environment (if using the Polydryer mod for these dryboxes).
Assembly:
- Place the bearing on “Carriage-L_Fixed”/"female" half of the bearing holder.
- Push the pin and the main body of the “Carriage-R_Fixed_Tight Pin Remix”/"male" half of the bearing holder into the bearing and female bearing holder half.
- NOTE: the center pin's ridges will deform as you push it into the bearing, ensuring a tight fit.
- Place flat on table and push hard, and/or use pliers to fully seat the two halves together for a tight fit.
- Verify that the bearing spins freely and does not rub against the walls of the holder.
Happy printing! 😉
